Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Tailored Traditional pull is a solid brass cabinet handle from the Tailored Traditional collection, so it delivers a coordinated look when you are outfitting multiple doors and drawers on the same project. The polished nickel finish gives the pull a bright, reflective surface, which helps the hardware stand out against painted or stained fronts in kitchens, baths, or built-ins. With a 5-1/16 inch (128 mm) center to center dimension, the pull matches common boring patterns, allowing straightforward layout on standard cabinet fronts. The overall length of 5-3/4 inches provides comfortable hand clearance across the width, which helps when operating heavier drawers. A projection of 1-5/16 inches sets the grip off the face of the cabinet, giving fingers room behind the pull while still keeping the hardware close to the door or drawer face. The 11/16 inch width creates a balanced profile that reads substantial without overwhelming the stile or rail.
The 128 mm center to center dimension defines the mounting hole spacing, which lets you line this pull up with standard 5-1/16 inch drilling jigs during cabinet fabrication or jobsite work. Because the overall length is 5-3/4 inches, the pull extends slightly beyond the mounting points, which leaves some visual margin at each end and helps cover minor drilling variances within normal tolerances. The 1-5/16 inch projection determines how far the handle stands off the door or drawer front, which influences finger clearance and how close fronts can be positioned to adjacent walls or appliances. With a width of 11/16 inch, the footprint on the cabinet face remains moderate, which helps when positioning the pull on narrow rails where space is limited but a centered, balanced look is still required.
This Tailored Traditional series handle is designed as a decorative cabinet pull in the Handles and Pulls category, which makes it suited to doors and drawers on cabinetry, built-ins, or furniture that benefit from a finished, coordinated appearance. The polished nickel finish ties into polished nickel faucets, hinges, and lighting, so you can extend the same metal tone across a full room layout. Because the center to center dimension is 128 mm (5-1/16 inches), the pull works wherever that standard drilling is used, whether on new cabinet runs or when swapping hardware on fronts already bored to that spacing. The solid brass construction places this pull within Berenson Corporation's decorative hardware lineup, which is geared toward woodworking and cabinet applications where the hardware is part of the visible design.
The exact 5-1/16 inch center to center spacing allows use of fixed drilling jigs or boring machines set to 128 mm, which helps keep handle alignment consistent from door to door on larger jobs. The 5-3/4 inch overall length means that, once mounted, each pull presents a repeatable visual span across the face, which supports symmetrical layouts when installed in banks of drawers. A projection of 1-5/16 inches holds the gripping surface away from the cabinet, which aids users with different hand sizes while still keeping the hardware profile controlled for tighter spaces. The 11/16 inch width keeps the sightline of each pull uniform, which matters when you are aligning multiple handles across upper and lower cabinets. The polished nickel finish across solid brass material creates a continuous look from piece to piece, which supports predictable results when the same model is used throughout a project.
The Berenson Tailored Traditional pull has a 5-1/16 inch (128 mm) center to center measurement, which matches many standard cabinet drilling patterns for straightforward handle placement.
The pull has an overall length of 5-3/4 inches, so it extends slightly beyond the mounting holes and provides a comfortable hand span across doors and drawers.
This cabinet pull projects 1-5/16 inches from the cabinet face, giving room for fingers behind the handle while maintaining a relatively low-profile installation depth.
The Tailored Traditional series pull is made from solid brass, providing a sturdy base for the decorative hardware used on frequently operated cabinet fronts.
The 1286-1014-P pull has a polished nickel finish, giving it a bright, reflective metal appearance that coordinates with other polished nickel fixtures.
The handle is 11/16 inch wide, which provides a visible but controlled footprint on cabinet rails and stiles for a tailored, proportionate look.
The Berenson Tailored Traditional pull brings a solid brass construction and polished nickel finish to cabinet doors and drawers that are bored on a 5-1/16 inch (128 mm) center to center pattern. Its 5-3/4 inch overall length, 1-5/16 inch projection, and 11/16 inch width give you defined dimensions to work into your layouts when planning new cabinetry or refreshing existing fronts. For projects where a coordinated polished nickel look and consistent, repeatable handle spacing matter, this 1286-1014-P model is suited to detailed woodworking and cabinet installations.
