Berenson Tailored Traditional Series 8-13/16" (224 mm) Center to Center Vintage Nickel Pull, - 1301-1VTN-P

Berenson Tailored Traditional Pull For Cabinets

Berenson Tailored Traditional pull is a solid brass cabinet handle in a vintage nickel finish, so it delivers a traditional profile with a muted metallic tone that suits built-in cabinetry and furniture projects. The pull has an 8-13/16 inch (224 mm) center to center dimension, which sets hole spacing for new cabinet layouts and supports accurate drilling on production jigs. Overall length is 9-5/8 inches, giving a visual presence that matches larger door and drawer fronts. A projection of 1-3/8 inches creates hand clearance away from the cabinet face, which helps users grip the pull comfortably. The 13/16 inch width provides a stable surface for fingers, helping reduce hand fatigue on frequently used doors. This pull belongs to the Tailored Traditional collection, giving installers a style reference when coordinating with other Berenson Corporation decorative hardware.

Key Tailored Traditional Pull Details In Use

• The solid brass material provides a substantial feel in the hand, which supports a quality impression on cabinet doors and drawers during everyday operation.
• The vintage nickel finish delivers a subdued metallic look, which helps the pull blend with traditional or transitional cabinet designs without appearing overly bright.
• The 8-13/16 inch (224 mm) center to center measurement defines the mounting hole spacing, which guides precise drilling and repeatable alignment across multiple fronts.
• The 9-5/8 inch overall length extends beyond the mounting holes, which visually anchors wider drawer fronts and balances larger door proportions.
• The 1-3/8 inch projection sets the pull away from the cabinet face, which creates finger room for a full grip and reduces contact with door or drawer surfaces.
• The 13/16 inch width gives the pull a comfortable grasp area, which supports firm handling on heavier drawers and solid-core cabinet doors.

Installation Dimensions For Accurate Mounting

The 8-13/16 inch (224 mm) center to center dimension on this Berenson Tailored Traditional pull defines the distance between mounting points, so shop layouts and on-site drilling can follow a consistent pattern. The pull uses 8-32 x 1 inch screw size, which fits standard tapped holes for typical cabinet applications and streamlines hardware selection on production runs. With a projection of 1-3/8 inches, installers can allow for door overlays and finger clearance in layout planning. The 9-5/8 inch overall length and 13/16 inch width also help determine visual spacing between adjacent pulls, so hardware lines stay even across door and drawer banks.

Using This Solid Brass Vintage Nickel Cabinet Pull

Where This Vintage Nickel Pull Fits Best

This Berenson Tailored Traditional Series pull in vintage nickel works on cabinets and casework where a traditional profile is preferred, because the finish and form match classic styling. The 8-13/16 inch (224 mm) center to center size suits wider drawers or taller doors, giving larger fronts a proportionate handle span. At 9-5/8 inches overall length, the pull can visually align with strong horizontal lines on drawer banks, which helps create a continuous hardware run across a kitchen or built-in installation. The 13/16 inch width and 1-3/8 inch projection support comfortable gripping on frequently used storage, which is useful on primary kitchen, bath, or office cabinetry. As a solid brass pull, it pairs naturally with other brass-based decorative hardware in the same Tailored Traditional collection for cohesive project planning.

Details That Support Repeatable Cabinet Results

The defined 224 mm (8-13/16 inch) center to center dimension on the 1301-1VTN-P Berenson pull aligns well with metric and imperial layout tools, which simplifies jig setup for repetitive drilling. Because the screw size is 8-32 x 1 inch, hardware ordering can follow a single thread standard across a project, which reduces part variation. The 1-3/8 inch projection gives allowance for door and drawer front thickness in clearance planning, which helps keep hands away from finished surfaces during daily use. With a 9-5/8 inch overall length, installers can reference the pull ends when lining up hardware relative to panel edges or rail locations, which supports consistent sight lines from cabinet to cabinet. The vintage nickel finish also offers a steady color reference when coordinating hinges or additional Berenson Corporation handles and pulls on the same job.

Common Questions About This Berenson Cabinet Pull

Selecting This Tailored Traditional Pull For Projects

This solid brass Berenson Tailored Traditional pull in vintage nickel, with its 8-13/16 inch (224 mm) center to center dimension and 9-5/8 inch overall length, suits larger cabinet doors and drawers that benefit from a substantial handle span. The 1-3/8 inch projection and 13/16 inch width support daily grip comfort, while the 8-32 x 1 inch screw size aligns with standard cabinet fastening approaches. For projects calling for a traditional profile and coordinated decorative hardware, this 1301-1VTN-P pull from Wurth Baer Supply offers defined dimensions that support precise layout and consistent visual results.