Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series 12 inch full extension drawer slides use a side mount, ball bearing design that lets the drawer travel the full 12 inch length, so the usable storage space is accessible from front to back for easier loading and visibility in cabinet installations. The Pro 2.0 Series drawer slides are unhanded, so the same member works on either side of the drawer, which streamlines layout on production runs and reduces part sorting during assembly. A 100 lb weight rating supports typical residential and light commercial drawer loads, so standard drawer contents stay supported through full extension without overstressing the members. The drawer member is made from cold rolled steel, giving a consistent profile that works well with tight clearances in casework. A black finish provides a clean, low-visibility look inside darker cabinets, which helps the hardware blend into the overall project.
The side mount configuration lets these Pro Value Series side mount drawer slides fasten directly to the cabinet side, which suits frameless and many face-frame layouts where side panels carry the load. The specified side clearance of 1/2 inch plus 1/32 inch to 0 between each drawer side and cabinet opening gives a clear machining target, so drawer boxes can be sized to slide smoothly without binding during full extension. The 32mm pattern on the slide matches common system drilling, which supports repetitive mounting on line-bored cabinet sides in production environments. Recommended fasteners are #8 x 7/16 inch Phillips pan head, providing a low-profile head that seats well in the slide's holes and offers solid hold in typical cabinet materials. The lever disconnect feature lets the drawer member release from the cabinet member after mounting, so drawers can be installed or removed without disturbing the cabinet-side work.
These 12 inch ball bearing drawer slides black from the Pro Value Series fit applications where the cabinet depth suits a 12 inch drawer member and a side mount layout is desired, such as smaller base cabinets, utility drawers, or upper cabinets needing controlled extension. The 100 lb weight rating aligns with many residential and light commercial storage needs, allowing typical dishware, utensils, or shop items to operate on full extension slides without overloading the hardware during normal use. Cold rolled steel members with continuous bearings support smooth and quiet performance over the travel, which suits kitchen, office, or lab environments that benefit from low-noise movement. The black finish works well with darker cabinet interiors or designs using black hardware, helping the slide integrate visually with the rest of the project. The unhanded design and lever disconnect together support straightforward drawer removal, which can be useful when fitting drawer fronts or accessing areas behind the drawer during future work.
The 32mm pattern on these Pro Value Series side mount drawer slides matches widely used system drilling, which supports consistent hole placement and repeatable slide positioning across a run of cabinets. The defined side clearance of 1/2 inch plus 1/32 inch to 0 provides a numeric target for drawer width, so shops can set up machinery or jigs to hit the same clearance on every box, reducing rework from drawers that are too tight or too loose. Industry ratings from BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 show that the slide design has been evaluated against recognized standards, which matters on projects that call for hardware complying with these performance or application benchmarks. Lever disconnect adds a practical step to the workflow, letting installers separate the drawer and cabinet members while fitting, then reconnect them once alignment is dialed in. Fixed rear brackets being available gives an option for jobs that use rear-mounting methods, supporting consistent slide positioning when the cabinet construction favors that style.
The Pro 2.0 Series 12 inch model is a side mount, full extension, standard ball bearing drawer slide, so the drawer travels its full length while running on ball bearings at the cabinet side.
These drawer slides use a side clearance of 1/2 inch plus 1/32 inch to 0 per side, guiding the drawer box width so it moves freely without excess play in the opening.
These 12 inch drawer slides have a 100 lb weight rating, so typical drawer loads in many residential or light commercial situations stay within the intended operating range.
These drawer slides specify #8 x 7/16 inch Phillips pan head fasteners, giving a head profile and size suited to the slide holes and common cabinet materials.
These drawer members are made from cold rolled steel with a black finish, providing a formed steel structure that visually blends into dark cabinet interiors.
These slides are industry rated to BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99, which aligns them with recognized hardware performance and application standards.
The Pro Value Series 12 inch full extension standard ball bearing drawer slides unify cold rolled steel construction, a 100 lb rating, and a defined 1/2 inch plus 1/32 inch to 0 side clearance, giving cabinet builders a clear basis for sizing drawers. The black, unhanded drawer member with lever disconnect fits production or custom shops that rely on side mount layouts using the 32mm pattern and #8 x 7/16 inch Phillips pan head fasteners. For projects matching a 12 inch slide length and side mount approach, this Pro 2.0 Series member supports smooth, full extension travel that aligns with system drilling and typical drawer loads.
Sold In: 60 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW46000 Mfr# 3670000235961 1000 | Würth #8 x 7/16" Truss Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000235961 1000 - 1000/Box |
