Transitions 2.0 knob in polished chrome is a square cabinet knob designed for decorative hardware applications where a clean, modern look is needed on doors or drawers. The knob from the Pro Value Series uses zinc construction, which supports a solid feel while keeping weight manageable on typical cabinet fronts. Its 1-1/8 inch length and 1-1/8 inch width create a balanced square profile that lines up well on face frames and drawer fronts. The polished chrome finish gives a reflective surface that ties in with other chrome decorative hardware in the same area. A base diameter of 7/16 inch keeps the footprint compact, which helps when laying out tight hardware patterns on narrow rails or small drawer fronts. Projection of 15/16 inch provides finger clearance while staying close to the cabinet face for a streamlined appearance.
The Transitions 2.0 knob uses an 8-32 x 1 inch screw size, creating a familiar thread and length that pairs with many standard cabinet door and drawer front constructions. The square 1-1/8 inch by 1-1/8 inch face gives clear reference edges, which assists when aligning multiple knobs in straight horizontal or vertical runs. With a 7/16 inch base diameter, the contact point against the cabinet face stays relatively small, allowing accurate centering on narrow frame members. The 15/16 inch projection positions the gripping surface away from the face just enough to capture with fingertips, which helps on both full overlay and face-frame cabinet designs. The polished chrome finish extends across the visible knob surfaces, so the mounted hardware presents a consistent appearance from different viewing angles.
This Pro Value Series knob from the Transitions 2.0 collection is positioned for use on cabinet doors and drawers that call for a square, modern profile. The 1-1/8 inch by 1-1/8 inch size suits many base, wall, and vanity cabinets where a mid-sized pull point is preferred. With its polished chrome finish, the knob coordinates with other polished chrome decorative hardware, so it can be used consistently across a full room to keep hardware finishes uniform. The zinc material provides a metal construction that works well in typical residential or light commercial cabinetry where decorative hardware is part of the design. The compact 7/16 inch base lets the knob sit comfortably on narrower rails often found on smaller doors or built-ins without overpowering the frame detail.
The matching 1-1/8 inch length and width simplify layout for installers who prefer equal offsets from edges, because the square format provides clear center marks from any side. The 15/16 inch projection establishes a predictable stand-off from the cabinet face, which helps keep finger clearance consistent on long runs of doors and drawers. Using an 8-32 x 1 inch screw size means the mounting thread is a known standard in cabinet shops, supporting efficient installation when hardware is repeated across multiple openings. The 7/16 inch base diameter concentrates contact close to the mounting hole, which can help the knob seat firmly against flat door and drawer surfaces. Combined with the polished chrome finish, these details allow the Transitions 2.0 knob to deliver a uniform appearance and handling feel across an entire installation.
The Transitions 2.0 knob measures 1-1/8 inch in length and 1-1/8 inch in width, which creates a square profile that helps maintain consistent spacing and alignment on cabinet doors and drawers.
The knob has a 15/16 inch projection, placing the gripping surface slightly under 1 inch from the cabinet face to balance finger clearance with a low-profile look.
The SZTR1-PC Transitions knob uses zinc material, providing a metal body suitable for regular cabinet door and drawer use in decorative hardware applications.
The cabinet knob is specified with an 8-32 x 1 inch screw size, giving a common thread and length that works with many standard cabinet front thicknesses.
The knob has a 7/16 inch base diameter, creating a compact contact area that suits narrow rails and small fronts without covering excessive surface.
The SZTR1-PC cabinet knob has a polished chrome finish, offering a bright surface that coordinates with other polished chrome decorative hardware.
The Pro Value Transitions 2.0 polished chrome knob combines a 1-1/8 inch square face, 15/16 inch projection, and zinc construction to serve typical cabinet door and drawer applications. Its 7/16 inch base diameter and 8-32 x 1 inch screw size align well with common cabinet construction practices. For projects needing a consistent polished chrome look with square decorative hardware across multiple openings, this SZTR1-PC knob provides a defined set of dimensions that support repeatable layout and installation on cabinetry.
Sold In: 1 Each