Pro Value Transitions Series pull gives you a 5-1/16 inch (128 mm) center to center handle that spans 7-3/4 inch overall length, so doors and drawers gain a full hand grip along the front without crowding adjacent fronts. The zinc construction provides a solid-feeling pull point, supporting repeated daily use on kitchen, bath, or shop cabinetry. A polished chrome finish reflects surrounding light, helping facings read cleaner after installation. The 7/16 inch width concentrates the gripping surface, which helps users get fingertip control on smaller fronts. A 1-1/8 inch projection stands the handle off the face, giving plenty of knuckle clearance when opening heavier drawers. The 15/32 inch base diameter at each mounting point defines a compact footprint, which suits narrow rail applications where wider bases would conflict with profiling or edge detailing.
The 5-1/16 inch (128 mm) center to center spacing defines the drilling layout, so both mounting holes land on a predictable metric pattern used widely in cabinet lines. With a 7-3/4 inch total length, the pull overhangs the mounting points at each end, giving some visual forgiveness if fronts vary slightly in width. The 1-1/8 inch projection sets the standoff from the surface, helping maintain consistent reach feel from drawer to drawer. A 7/16 inch width means the bar sits narrow across the face, useful where there is limited stile or rail width. The 15/32 inch base diameter concentrates load around each screw location, helping the pull register flat and stable once tightened onto the door or drawer front.
The Transitions pull with its 5-1/16 inch (128 mm) center to center dimension fits layouts that follow this standard spacing, so it works naturally across banks of drawers using that pattern. A 7-3/4 inch overall length lets the hardware span most common drawer front widths, giving a centered gripping point that feels balanced. The 1-1/8 inch projection keeps the pull offset from the face, which benefits installations on thicker doors or fronts where knuckle clearance matters. With a 7/16 inch width, the pull suits narrow rails on wall cabinets as well as full slab drawer fronts, helping one style serve across multiple cabinet types. The 15/32 inch base diameter keeps each end compact, which helps on doors with decorative edges where larger bases could interfere with the profile.
The 5-1/16 inch (128 mm) center to center measurement allows jigs and boring patterns built around the 128 mm standard to be reused, which streamlines drilling across a full kitchen or shop run. Because the 7-3/4 inch length extends past the mounting holes, installers gain an easy visual reference to center the pull on fronts without relying only on pencil marks. The 1-1/8 inch projection provides a consistent standoff that feels the same whether mounted on base, wall, or tall cabinets, helping users build muscle memory when operating doors. The 7/16 inch width limits the bar footprint while still giving a defined gripping edge, which can reduce interference with adjacent doors in tight reveals. Each 15/32 inch base diameter defines a clear contact circle on the surface, helping the pull seat evenly when tightened so rows of hardware line up cleanly from cabinet to cabinet.
The Pro Value Transitions Series pull has a 5-1/16 inch (128 mm) center to center size, so hole spacing follows a common cabinet drilling standard used on many door and drawer layouts.
The SZTR8-PC polished chrome pull measures 7-3/4 inch in overall length, giving extended grip coverage across the face of typical cabinet doors and drawers.
This cabinet pull projects 1-1/8 inch from the door or drawer face, creating space for fingers and knuckles when opening heavier cabinet fronts.
The Transitions pull is made from zinc with a polished chrome finish, combining a solid base material with a bright surface that coordinates with chrome fixtures.
The bar section of this cabinet handle is 7/16 inch wide, so the profile stays slim across the cabinet face while still giving a defined gripping edge.
Each mounting point on the pull has a 15/32 inch base diameter, creating a compact contact area that seats neatly on rails or slab fronts.
The Pro Value Transitions Series pull ties a 5-1/16 inch (128 mm) center to center layout to a 7-3/4 inch length, giving both drilling predictability and visual coverage on cabinets. Zinc construction with a polished chrome finish delivers a bright, uniform look across doors and drawers. A 1-1/8 inch projection, 7/16 inch width, and 15/32 inch base diameter define how it stands off, spans, and contacts the surface, which helps plan hole placement on different front styles. When a project calls for this specific Transitions SZTR8-PC dimension set, this pull provides a consistent, repeatable hardware choice for runs of cabinetry.
Sold In: 1 Each