Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool SysLite STL 450 surface inspection light set is purpose-built as an inspection light, so it puts a bright, focused beam close to the work surface and makes flaws and defects clearly visible while you work. The light delivers 1,500 lumens at a color temperature of 5,000 Kelvin, which produces high quality lighting that shows surface detail and color without distortion, helping you judge sanding and finishing steps accurately. Designed with impact-resistant, non-marring full body protection, the housing protects both the light and the work surface, reducing the risk of damage when you rest or lean the unit against finished areas. The system is designed for handheld or handsfree usage, so you can either carry it along a surface or set it in position while you sand, fill, or coat. This focused inspection setup helps reduce callbacks and increases customer satisfaction by letting you spot issues before the job is signed off.
The SysLite STL 450 surface inspection light set uses an AD-ST DUO 200 adapter with the ST DUO 200 tripod, which provides a stable stand for positioning the light along walls, ceilings, or horizontal surfaces during inspection. The tripod lets you set the beam at a consistent height and angle, keeping the light close to the surface so fine defects remain visible across a wider area. Handheld or handsfree usage is supported by the same inspection-focused form factor, so you can either carry the light along the surface or mount it on the tripod when a fixed inspection line is preferred. With IP 55 protection against water and dust intrusion around the housing, the mounted light continues working dependably in dusty sanding environments, so you can keep it set up through multiple passes without constant cleaning.
The SysLite STL 450 surface inspection light is designed for sanding a wall or finishing a tabletop, so it aligns closely with drywall, paint, and woodworking workflows where surface quality drives the final result. When you run 1,500 lumen output across a sanded wall, low spots, ridges, and scratch patterns stand out, letting you refine joint compound or sanding sequences before priming. On tabletops and other horizontal work, the 5,000 Kelvin color temperature helps you see swirl marks and grain raise under realistic light, so you can adjust grit progression or leveling passes. Because the body has non-marring full protection, you can move the light along finished pieces with reduced risk of marking the surface as you check for defects. The option to use it handheld or handsfree means the same tool supports quick spot checks and longer inspections where the beam stays fixed while you work through a section.
The surface inspection light set uses the AD-ST DUO 200 adapter with the ST DUO 200 tripod, so the light can be placed at a consistent distance from the surface, which is critical for seeing small flaws over a broad area. Setting the light on the tripod keeps the beam angle steady as you move along a wall or across panels, so defects appear the same way from section to section and are easier to track and correct. The tripod-based setup works together with the 1,500 lumen, 5,000 Kelvin output to provide strong, even illumination that reveals sanding marks, patch transitions, and coating variation before final coats. Because the light carries an IP 55 rating against water and dust intrusion, it remains effective on the stand in dusty sanding zones, so inspection can run alongside active surface preparation. This stable, repeatable arrangement supports reduced callbacks and increased customer satisfaction by helping you deliver uniform surfaces across entire rooms or large workpieces.
The SysLite STL 450 surface inspection light is purpose-built to put light close to the surface so flaws and defects are perfectly illuminated, helping you perfect sanding and finishing work.
The Festool surface inspection light delivers 1,500 lumens, providing strong illumination that highlights surface defects on walls, tabletops, and other workpieces while you sand or finish.
The 5,000 Kelvin color temperature provides high quality, neutral lighting that shows true surface color and texture, supporting accurate evaluation of sanding and finishing quality.
The IP 55 rating against water and dust intrusion allows the light to operate reliably in typical dusty or slightly damp shop conditions, so inspection can continue alongside active prep work.
The STL 450 offers handheld or handsfree usage, so you can either carry it along a surface or position it while both hands stay on sanding, filling, or finishing tools.
The impact-resistant, non-marring full body protection reduces the risk of marking finished or prepared surfaces when the light is rested or moved close to the work.
The SysLite STL 450 surface inspection light set with tripod and adapter delivers 1,500 lumens at 5,000 Kelvin in a purpose-built inspection form factor, giving you clear visibility of surface defects while sanding or finishing. Impact-resistant, non-marring full body protection and an IP 55 rating against water and dust intrusion keep the light effective in real shop and jobsite conditions. With handheld or handsfree usage through the tripod setup, this inspection system supports consistent, visible results that help reduce callbacks and increase customer satisfaction across sanding and finishing projects.
Sold In: 1 Each