Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 Logica hinge is built for cabinet doors that sit on a 30-degree outward angle, delivering a self-closing, toolless-mounting concealed solution for angled and bay-style cabinetry on both face-frame and frameless boxes.
A standard straight-cabinet hinge will not sit right on a door that angles outward. This hinge is engineered to the +30 degree geometry so the arm aligns correctly with the door and cabinet at that angle, letting the door swing and close without binding. It fits the angled corner treatments found in diagonal wall cabinets, bay-style base runs, and blind-corner alternatives where the door faces outward rather than straight ahead. The 35mm cup bores into the back of the door in the usual way, and the hinge arm connects to a Salice base plate mounted to the cabinet, ordered separately.
The hinge body is steel with a nickel finish. After the cabinet is set and doors are hung, the built-in adjustment lets you walk the door to an even reveal: side adjustment of +4.5mm and -1.5mm handles lateral alignment, and height adjusts plus or minus 2mm to level pairs of doors. The toolless Logica clip keeps the physical install fast, which matters when a bay run carries several doors at the same angle.
Cabinet shops building kitchen runs with diagonal corner cabinets, designers specifying angled or bay-style fronts, and contractors working through multi-cabinet installs all reach for a geometry-specific hinge like this one when the opening is not square to the wall. It suits standard doors in the 16 to 22mm thickness range on either frameless or face-frame boxes. Because overlay is set by the arm geometry together with the plate you select, confirm the plate height and position against your door's target overlay before ordering. For a damped, cushioned close rather than a spring pull, look to the Silentia+ soft-close version of the Series 200 line.
It means the cabinet opening faces outward at 30 degrees from the run, the geometry of diagonal and bay-style doors. The hinge arm is shaped for that angle so the door hangs and closes correctly. A standard hinge at this angle will not sit flush or close cleanly.
Yes. The hinge arm clips to a base plate that mounts to the cabinet side or face-frame stile, and that plate is sold separately. Use a Salice plate matched to your cabinet construction and door position. Plates are brand-specific, so plates from other manufacturers will not connect to this hinge.
No. This is a self-close hinge: a spring draws the door shut over the last few degrees but does not cushion the close. For a damped, quiet close on the same angled application, choose the Silentia+ soft-close version of this series.
Yes, with the right Salice plate. Frameless boxes take a frameless wing plate; face-frame boxes take a face-frame plate. The hinge body itself works on both as long as the plate matches the cabinet construction.
When the design calls for outward-angled doors that close on their own and install without reaching for a screwdriver, this is the hinge that fits the angle and keeps the job moving.
Sold In: 1 Each