
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Desert Rose edgebanding from Doellken Woodtape is a PVC edge banding sized at 3mm thick by 15/16 inch wide, so it covers standard panel edges while adding a defined, substantial edge profile for cabinet and furniture projects that call for this thickness.
This edge banding is supplied in a 328 foot roll, which supports longer production runs and multiple cabinets in the same Tafisa L502 Desert Rose-inspired layout, helping projects stay consistent from piece to piece without frequent roll changes during the job.
The color of this PVC edge banding is identified as Desert Rose, with a stated color match to Tafisa L502 Desert Rose ISOLA at a Good level, so fronts, doors, and visible edges work together visually when using that Tafisa board in the main construction.
The product is described as Edgebanding Desert Rose Edgebanding in the Edge Banding category, so it is intended specifically for finishing and protecting raw panel edges in typical woodworking and cabinet shop workflows where this color and format are part of the design.
This Desert Rose edgebanding is made from PVC and is 3mm thick, so it works in workflows set up for 3mm PVC edge banding, allowing equipment configured for that thickness to apply and trim the material consistently on repeated cabinet parts.
The 15/16 inch width suits edge-banding lines or manual processes that work with edges around typical panel sizes while allowing for trimming on both faces, which supports neat, squared edges once excess is cut back after bonding.
The 328 foot roll format fits production or shop environments that prefer longer runs of the same color and dimension, so once the roll is staged at the edgebander, multiple panels can cycle through without changing the banding material midstream.
The Desert Rose color match to Tafisa L502 Desert Rose ISOLA at a Good level means that when panels reference that Tafisa design, the applied PVC edging is intended to stay visually close to the board faces, which helps reduce contrast along visible door and cabinet edges.
This Desert Rose edgebanding from Doellken Woodtape is part of the Edge Banding class in Edgebanding & Surfacing, so it is positioned for cabinetmaking and woodworking where PVC edge treatment is the standard for protecting and finishing panel edges.
The color reference to Tafisa L502 Desert Rose ISOLA, with a Good color match, makes this roll particularly suited to projects using that Tafisa board as the main surface, because the edging color is tuned toward that design rather than a generic neutral tone.
The 3mm thickness provides a heavier edge build than thin tape, so it aligns with applications such as cabinet doors, drawer fronts, and exposed shelving where a thicker PVC edge is often selected for visual presence and edge durability in day-to-day use.
The 15/16 inch width lets this edgebanding cover typical panel thicknesses used in casework and furniture projects while leaving a small amount for trim-off, which supports tidy edges on both sides after finishing passes at the edgebander or during manual flush trimming.
The 328 foot roll length supports small production runs and larger one-off projects where multiple cabinets or furniture pieces share the Desert Rose look, so the same roll can typically handle groups of components without frequent material swaps.
The specific manufacturer part number 30572-1503-1 identifies the Desert Rose, 3mm thick, 15/16 inch wide, 328 foot configuration, so specifying that number helps keep jobs and reorders tied to the same thickness, width, and color reference over time.
The Good color match to Tafisa L502 Desert Rose ISOLA means the edging is designed to coordinate with that board pattern, so when panels and edging share that reference, door and cabinet edges present a connected look rather than a sharply contrasting band.
The PVC construction sets this edging within the PVC edge banding category, so it fits into shop practices that routinely apply PVC edges for cabinet interiors, exteriors, and shelving projects where that material type is already standard for finishing panel edges.
The combination of 3mm thickness and 15/16 inch width defines how the Desert Rose edgebanding sits on the panel and how much trim margin is available, which is important when dialing in equipment or hand processes so the finished edge appears even along the full run.
The 328 foot roll format establishes how far a single roll will carry through a project, so planning cabinet or furniture runs around that length helps keep all visible edges on a job tied to the same production batch of Desert Rose material.
The Desert Rose edgebanding measures 3mm thick by 15/16 inch wide, so it is sized for 3mm edge banding applications and provides coverage with trim margin on typical cabinet and furniture panels.
The Doellken Woodtape Desert Rose edgebanding roll is 328 feet long, allowing one roll to service multiple cabinet or furniture parts in the same color during a project run.
The Desert Rose edge banding is PVC, so it fits shop workflows that are set up for applying and trimming PVC edge banding on cabinetry and similar panel-based constructions.
This edgebanding is noted as a color match to Tafisa L502 Desert Rose ISOLA at a Good level, so it is tuned to coordinate visually with that specific Tafisa board pattern.
The part is identified by manufacturer number 30572-1503-1, which ties directly to the Desert Rose, 3mm thick, 15/16 inch wide, 328 foot PVC edgebanding configuration.
This Desert Rose edgebanding is provided by Wurth Baer Supply, a specialty wholesale distributor serving the woodworking industry with edgebanding and related materials.
This Desert Rose edgebanding from Doellken Woodtape combines 3mm PVC construction, 15/16 inch width, and a 328 foot roll length with a Good color match to Tafisa L502 Desert Rose ISOLA, so cabinet and woodworking projects using that board can carry the same Desert Rose look right across exposed panel edges.