Danish Maple edgebanding from Doellken Woodtape is a PVC edge banding designed to finish exposed panel edges in a Danish Maple look, so cabinet and casework projects carry the same visual tone across faces and edges. The .018 inch thickness keeps the edge profile slim, which helps maintain a clean line on cabinet doors, drawer fronts, and case edges without creating a bulky transition. The 15/16 inch width gives coverage for typical panel thicknesses with enough material to trim flush, supporting a neat finished edge after trimming operations. The color is specified as a match to Formica 8906 Danish Maple in the 58 matte finish, giving a coordinated appearance when this edgeband is used on projects surfaced with that laminate. The extended 600 foot roll length supports production runs where long, continuous edging is needed, reducing time spent changing rolls during repetitive work.
The .018 inch thickness on this Doellken Woodtape edge banding means the applied strip sits close to the face material, helping trimming tools cut flush without leaving a heavy ridge along cabinet or panel edges. With a 15/16 inch width, the banding overhangs common panel thicknesses, giving installers working room for alignment and final trimming while still covering the substrate. The Danish Maple color match to Formica 8906 in 58 matte helps the finished edge sit visually level with the laminate face, which is valuable where a consistent tone across doors, drawer fronts, and carcass edges matters.
This Doellken Woodtape edge banding is specified as a Danish Maple color match to Formica 8906 in the 58 matte finish, so it suits projects built around that laminate design on cabinet doors, drawer fronts, or carcinet panels. The PVC construction and .018 inch thickness align with common edgebanding equipment, which means it works in typical edgeband application and trimming stations used in woodworking shops. The 15/16 inch width pairs well with standard sheet goods used in cabinetry and fixtures, giving enough coverage across the edge for trimming without exposing the core material. Because the roll length is 600 feet, this Danish Maple edgeband serves well in runs of multiple cabinets or repeated casework parts, supporting consistent color along every exposed edge on that job.
The .018 inch thickness helps cutting and scraping tools remove overhang without digging into the face, which supports a uniform feel along door and panel edges. By keeping the edge build thin, the transition from the Formica surface to the Danish Maple PVC edge remains subtle, so light reflects more evenly across the assembly. The 15/16 inch width gives installers extra material to register against the panel face during application, then trim back to a straight, square edge, reducing the chance of thin spots that might reveal the substrate. The defined match to Formica 8906 in 58 matte keeps color selection straightforward when that specific design is used, which simplifies ordering for repeat jobs and helps maintain visual continuity across replacement parts produced later.
This product is a PVC edge banding from Doellken Woodtape, so it is suited to standard PVC edgeband application and trimming processes used in woodworking shops.
The Doellken Woodtape 30594-1518-1 edgebanding is 15/16 inch wide, giving coverage beyond typical panel thickness for accurate alignment and trimming.
This PVC Danish Maple edge banding is .018 inch thick, so it creates a low-profile edge that trims flush without leaving a heavy lip at the panel face.
The roll length is 600 feet, supporting longer production runs where many cabinet or case parts need the same Danish Maple edge finish.
This edge banding is described as a color match to Formica 8906 Danish Maple in the 58 matte finish, supporting visual coordination with that laminate.
The color match is specified to Formica 8906 Danish Maple in the 58 matte finish, giving an edge appearance suited to that same low-sheen surface.
This Doellken Woodtape Danish Maple edgebanding combines .018 inch thickness, 15/16 inch width, and a defined color match to Formica 8906 Danish Maple in 58 matte, giving cabinet and casework projects coordinated edges. For runs centered on that laminate design, the 600 foot roll length supports consistent edging across doors, drawer fronts, and panels, so production can move efficiently while maintaining the same Danish Maple tone at every exposed edge.