PVC edgebanding Biltmore Cherry identifies this Doellken Woodtape edge banding as a PVC edge treatment in the Biltmore Cherry color family, so cabinet and fixture projects gain a coordinated finished edge instead of showing raw substrate or laminate edges. The 15/16 inch width covers typical panel edges with slight overhang, giving room for trimming flush without exposing the core. The 0.018 inch thickness provides a slim edge profile that keeps the transition from face to edge visually tight, which supports a clean, furniture-like appearance on doors and casework. The 600 foot roll length supplies continuous material for longer runs, which reduces time spent changing rolls during commercial or multi-room jobs. The color match reference to Wilsonart 7924K Biltmore Cherry connects this banding to that decorative surface design, helping projects maintain visual consistency around doors, drawer fronts, and work surfaces. The gloss embossing and 07 texture tie the edge appearance to the surface texture family.
This edge banding uses a 15/16 inch width, giving installers working room to align the tape slightly proud of the panel surface, then trim back for a controlled flush reveal. The 0.018 inch thickness keeps the edge slim, which helps trimming tools track cleanly and leaves less material to feather at corners. The PVC composition defines it as a flexible plastic edge, supporting standard methods used for PVC banding in cabinet shops. The Biltmore Cherry color and gloss embossing establish an appearance target during layout and cutting, so parts can be oriented to keep grain direction and sheen consistent around doors and tops. The 600 foot roll format suits shop environments where repeated cuts from the same color and texture are needed across multiple cabinets or furniture components.
The manufacturer part number 3465S-1518-1 uniquely identifies this specific combination of color, thickness, width, and finish, so repeat orders can match earlier jobs using the same specification. The web description states a color match to Wilsonart 7924K Biltmore Cherry with 07 texture, positioning this banding for use alongside that decor in laminated casework, fronts, and surfaces. By aligning the banding to that color reference, projects using Wilsonart 7924K can carry the same visual language from the face material onto every exposed edge, which is especially useful on banks of cabinets or long runs of panels. The classification under Edgebanding & Surfacing and Product Class Edge Banding describes its role as the finishing strip that transitions from face material to edge, helping panels present as finished components rather than raw cut sheets. The Biltmore Cherry tone and gloss embossing allow edges on doors, panels, and shelving to visually integrate with the decorative face pattern.
The 15/16 inch by 0.018 inch format defines both coverage and build of the edge, so layout decisions can account for slight overhang while maintaining a thin profile that does not visually dominate corners. This combination helps trimming and scraping steps remove only a small amount of material, which can reduce the chance of cutting back into the laminate face on narrow components. The 600 foot roll length supports batching parts by color, allowing a run of Wilsonart 7924K Biltmore Cherry-based components to be edged from a single roll for consistent appearance. The gloss embossing, aligned with 07 texture, anchors both sheen and tactile feel, helping installers align the edge banding to similar texture cues on the face laminate for a more continuous finished surface. The identification as PVC Edgebanding, Color 3465S Biltmore Cherry, gives shops a clear label to store and retrieve for future repairs or additional matching components.
This PVC edgebanding is 15/16 inch wide and 0.018 inch thick, which provides full edge coverage with a slim profile that trims back cleanly on cabinet and casework panels.
The Doellken Woodtape 3465S-1518-1 roll is 600 feet long, supporting continuous edging on larger runs of doors, drawer fronts, and panel components in the same color.
This edge banding is specified as a color match to Wilsonart 7924K Biltmore Cherry with 07 texture, helping edges visually align with that decorative surface.
This product is PVC edge banding with gloss embossing and 07 texture, giving a coordinated sheen and feel that supports a unified appearance with matching decorative materials.
The 0.018 inch thickness keeps the edge profile slim, reducing bulk at corners and helping trimmed edges blend smoothly with laminate faces on finished cabinets.
This Biltmore Cherry PVC edgebanding suits projects using Wilsonart 7924K Biltmore Cherry decor, such as laminated cabinets, casework, and furniture needing matched exposed edges.
This PVC edgebanding, Color 3465S Biltmore Cherry, combines a 15/16 inch width, 0.018 inch thickness, and 600 foot roll length to support efficient edging on Wilsonart 7924K Biltmore Cherry projects. The Doellken Woodtape brand, gloss embossing, and 07 texture alignment help edges follow the same visual direction as matching decorative surfaces. For jobs where Biltmore Cherry tone and texture must carry cleanly across every visible edge, this 3465S-1518-1 roll provides a clearly defined specification to integrate into shop workflows and repeat on follow-up work.