Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding millwork cherry from Doellken Woodtape is a PVC edge banding designed to finish exposed panel edges in a Millwork Cherry look, so cabinet and furniture projects can carry the same tone across edges and faces. The 0.018 inch thick construction creates a low-profile edge that dresses raw substrate without adding bulk, which helps doors and panels keep a slim, uniform line. The 15/16 inch width works with common 3/4 inch panels, giving enough overhang for trimming while still keeping waste under control. The 600 foot roll length supports longer runs or multiple jobs from a single roll, which helps streamline material staging for repeat colors. The Millwork Cherry color is listed as a color match to Pionite WC431 Millwork Cherry H Hi-Brite, Good, so panel faces using that design can carry the same visual across edge details.
This PVC edge banding in 15/16 inch width aligns well with common 3/4 inch board thickness, so installers can center the band, trim both sides, and maintain a neat reveal. The 0.018 inch thickness means minimal build at the edge, which helps keep door and drawer fronts closer to nominal dimensions when tight reveals matter. With 600 feet per roll, edge processing lines can run long batches in Millwork Cherry without frequent roll changes, which supports steadier throughput. The defined Millwork Cherry color match to Pionite WC431 Millwork Cherry H Hi-Brite, Good helps designers and fabricators specify this band when they want the edge appearance to track that decorative surface.
This PVC edgebanding is aligned to Millwork Cherry color work where designers are using Pionite WC431 Millwork Cherry H Hi-Brite, Good as the decorative surface, so the edge treatment follows that same cherry tone. The 15/16 inch width matches well with edge finishing on 3/4 inch sheet goods in casework, fronts, and shelving, letting fabricators run edges and still have enough material for clean trimming passes. Because the roll length is specified at 600 feet, the product can serve shops running multiple cabinets, closets, or furniture pieces in the same Millwork Cherry program without frequent coil changes. The edge banding category designation as Edgebanding & Surfacing, Edgebanding, PVC positions this product as a PVC solution within surfacing workflows where laminated or decorative sheet faces require matching edges.
The combination of 0.018 inch thickness and 15/16 inch width provides a defined edge geometry, which helps operators set trimming and flush routing based on known overhang and minimal profile build. This helps maintain consistent reveals where doors, drawer fronts, or panels meet, especially important when repeated components share a common Millwork Cherry layout. The Millwork Cherry color, listed as a color match to Pionite WC431 Millwork Cherry H Hi-Brite, Good, gives specifiers a clear reference, which supports visual continuity from panel surface to edge treatment in finished installations. The manufacturer part number 4579-1518-1 creates a direct link to this exact configuration of thickness, width, color, and roll length, which helps shops standardize this edge detail in their materials lists. As an edge banding within the Edgebanding & Surfacing category, this PVC product fits directly into established panel surfacing and edging processes that rely on coordinated decorative designs.
This PVC edgebanding is 0.018 inch thick, 15/16 inch wide, and supplied in a 600 foot roll, which supports long runs while keeping a thin, trim-friendly edge profile.
This edgebanding is listed as a Millwork Cherry color match to Pionite WC431 Millwork Cherry H Hi-Brite, Good, which supports visual continuity between that surface design and the edge.
This Millwork Cherry PVC edgebanding is produced by Doellken Woodtape, which gives shops a defined brand and part number reference for repeat purchasing.
The 0.018 inch thickness provides a slim edge, helping panels stay near nominal size so doors, drawer fronts, and shelves maintain consistent clearances after edging.
The 15/16 inch width gives modest overhang on typical 3/4 inch boards, allowing trimming on both sides to a flush edge without excessive waste.
Part number 4579-1518-1 identifies this specific Millwork Cherry PVC edgebanding configuration, tying together color, 0.018 inch thickness, 15/16 inch width, and 600 foot roll length.
This PVC edge banding from Doellken Woodtape provides a defined Millwork Cherry color match to Pionite WC431 Millwork Cherry H Hi-Brite, Good in a 0.018 inch thick, 15/16 inch by 600 foot format. That combination supports coordinated panel projects where visual continuity and repeatable edge dimensions matter. When a job calls for Millwork Cherry work using that Pionite design, selecting this 4579-1518-1 edgebanding aligns the edge treatment with the decorative surface and keeps edge sizing predictable across production.