Doellken Woodtape edge banding in the 7560TM-1518-1 part number is a PVC edge banding designed to finish exposed edges with a consistent Slate tone. The 15/16 inch width covers standard panel edges with a small margin, helping conceal minor alignment variations along cabinet and furniture runs. The .018 inch thickness gives a low-profile edge that blends with laminate or melamine faces, supporting a clean finished look. The color match noted as Tafisa L228 Slate ISOLA - Good means this Slate edging is aimed at complementing Tafisa L228 Slate ISOLA surfaces, so door and panel edges carry through the same intended color story. The 600 foot roll length supports longer production runs or multiple installations using the same decor, reducing material interruptions between jobs.
The PVC edge banding with a 15/16 inch width is sized to cover 3/4 inch substrate edges while leaving extra material for trimming flush, which supports tight seams along cabinet and furniture edges. The .018 inch thickness keeps the banding modest in build, so the transition from face to edge remains subtle on vertical fronts and shelf edges. The 600 foot roll format lends itself to repeated cuts from a single roll in a shop environment, supporting runs of panels or doors that all use the same Slate tone. With the color match described specifically as Tafisa L228 Slate ISOLA - Good, this banding is positioned for projects where Tafisa L228 Slate ISOLA is the main surface.
This Doellken Woodtape edge banding is in the Edge Banding, PVC product class, so it is intended for closing off raw edges on panels and components that work with PVC edging. The Slate color is directly referenced as a color match to Tafisa L228 Slate ISOLA, which points it toward cabinetry, casework, or fixtures using that Tafisa decor as the primary surface. The 15/16 inch width covers edges on panels built around 3/4 inch stock, so it aligns with many cabinet sides, tops, bottoms, and door blanks. The 600 foot roll length supports use on multi-piece jobs, allowing the same Slate edge to repeat across banks of doors, drawer fronts, and end panels without a change in lot.
The fixed width of 15/16 inch gives a repeatable edge band dimension, which helps maintain uniform reveal after trimming on doors and panels sized from the same core material. The .018 inch thickness provides a thin edging layer, helping the edge follow the panel face and reduce shadow lines along cabinet fronts. The PVC material classification ties this edging to typical PVC edge banding processes, so shops working with that class of banding can align it with their existing workflows. The specific part number 7560TM-1518-1 and SAP description 15/16X.018 EB, SLATE 600FT/RL identify the exact Slate configuration, which aids in matching earlier projects that used this same edge. The color match statement to Tafisa L228 Slate ISOLA - Good positions this edging for applications where the surface and edge are expected to stay visually coordinated from panel face through the vertical edge.
The product is described as 15/16X.018 EB, SLATE 600FT/RL, so it is a 15/16 inch wide, .018 inch thick PVC edge banding supplied in a 600 foot roll, supporting extended edging runs.
The web description notes a color match Tafisa L228 Slate ISOLA - Good, so this Slate banding is aimed at visually complementing Tafisa L228 Slate ISOLA surfaces along exposed edges.
The category Edgebanding, PVC identifies this product as PVC edge banding, aligning it with projects and shop equipment set up around PVC edging processes.
The brand is Doellken Woodtape, so this Slate PVC edge banding follows the Doellken Woodtape line used across many cabinet and casework shops.
The SAP description lists 600FT/RL, giving a long roll that supports repeated cutting or feeding for multiple panels using the same Slate edging.
The manufacturer part number 7560TM-1518-1 and SAP text 15/16X.018 EB, SLATE 600FT/RL provide clear identifiers, helping match future orders to this exact Slate edging.
The 7560TM-1518-1 Doellken Woodtape edge banding combines a 15/16 inch width, .018 inch PVC construction, and a Slate tone matched to Tafisa L228 Slate ISOLA - Good. The 600 foot roll format suits multi-piece cabinet or fixture runs built around that same decor. For projects where Tafisa L228 Slate ISOLA sets the panel appearance, this edging gives a defined way to carry the Slate look across all finished edges using a single identified part.