PVC edgebanding Wenge Strand is a Doellken Woodtape PVC edge banding in color 8015 Wenge Strand that covers and finishes exposed panel edges. The 0.018 inch thickness creates a thin, low-profile edge that sits close to the panel face, which helps when matching modern casework and minimizing visible transitions. The 15/16 inch width gives coverage for common panel thicknesses while allowing a small trim margin, so installers can flush-trim without exposing the core. The 600 foot roll format keeps longer runs available from a single coil, which reduces coil changes on repetitive cabinetry or commercial jobs. As part of the edgebanding, PVC category, this edge banding is built for surfacing applications on panels, so it fits naturally into woodworking and cabinet production workflows where a matched Wenge Strand appearance is required.
This PVC edgebanding, at 0.018 inch thick, presents a thin profile that works well where a light edge is preferred, helping panels retain a crisp look after trimming. The 15/16 inch width gives enough coverage to span the panel edge with slight overhang on both sides, so installers can trim back to a consistent line along cabinet doors or panels. The 600 foot roll length supports edge banding operations over many parts from a single roll, which keeps handling simpler during an installation or shop run that uses the Wenge Strand color.
This PVC edgebanding in color 8015 Wenge Strand fits edge surfacing needs where panel faces use a Wenge Strand design and the edges need a coordinated look. The 15/16 inch width suits many panel-based components, so it can be applied to cabinet sides, doors, and shelving that fall within standard thickness ranges. As an edge banding, PVC product, it supports woodworking and surfacing tasks where exposed edges of composite or laminated panels need coverage. The continuous 600 foot roll helps on projects that repeat the same Wenge Strand material over multiple rooms or casework runs, keeping color and edge dimensions consistent throughout the job. The Doellken Woodtape branding ties this edging to a focused edge banding line, which is useful when a shop organizes materials by manufacturer and color reference.
The 0.018 inch thickness gives a predictable, thin PVC layer, so trimming equipment can be set for light cuts that leave the edge tape nearly flush with the panel surface. Because the edgebanding is 15/16 inch wide, there is enough margin to account for slight panel thickness variation while still trimming to a clean, straight edge along both faces. Over a 600 foot roll, those same dimensions repeat across many parts, which supports consistent setup of edge banders or manual trimming tools across an entire production run. The color 8015 Wenge Strand designation keeps the edge tone tied to that specific Wenge Strand appearance, which helps maintain visual continuity when multiple components meet at corners or door gaps. Together, these fixed dimensions and the defined color code give installers and fabricators a stable reference when planning cuts, edging passes, and final alignment in Wenge Strand projects.
This PVC edgebanding is 15/16 inch wide and 0.018 inch thick, which offers light build on the edge while still providing enough width for trimming to a flush panel edge.
The Doellken Woodtape 8015 Wenge Strand PVC edgebanding roll is 600 feet long, which supports edging multiple cabinets or panel runs from one continuous coil.
This Wenge Strand edge banding is made from PVC, which is suited for edgebanding and surfacing applications on panel edges in woodworking environments.
The 0.018 inch thickness provides a thin PVC layer on the edge, which helps maintain a sleek profile and supports tight reveals after trimming and finishing.
Color 8015 Wenge Strand indicates that the PVC edgebanding is matched to a Wenge Strand appearance, helping panel edges visually coordinate with Wenge Strand surfaces.
This PVC edge banding is classified as edgebanding and surfacing material, so it suits panel edge coverage on cabinetry, casework, and similar woodworking projects.
This PVC edgebanding in color 8015 Wenge Strand provides a 0.018 inch thick, 15/16 inch wide edge solution on a 600 foot roll for surfacing panel edges. For projects built around a Wenge Strand look, this Doellken Woodtape edge banding gives a defined color, size, and material combination that fits panel-based woodworking and cabinetry work where consistent edging is required.