
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Edgebanding 9340 White Sand describes a PVC edge banding designed to finish exposed edges so panel cores stay covered and the finished work looks consistent from face to edge. The .018 inch thickness creates a low-profile transition that keeps the edge discreet while still masking the substrate. The 15/16 inch width gives coverage across standard panel thicknesses with a margin that helps installers trim flush without exposing the core. The Doellken Woodtape brand identifies this product as part of a dedicated edge banding line, which helps shops align it with existing Doellken processes. The SAP description stating 15/16X.018 EB, WHITE SAND 600FT/RL shows that this is supplied as a continuous 600 foot roll, so sessions on repetitive cabinet or fixture runs can be handled with one part number. The PVC edgebanding and surfacing classification places it in typical woodworking and laminate finishing workflows where a color-matched band is required.
The .018 inch thickness on this edge banding sets expectations for trimming and scraping, because installers can tune their tools for a thin PVC profile that blends neatly into the laminate face. The 15/16 inch width gives enough overhang across standard panel edges so the band can be positioned confidently and trimmed back without leaving gaps. The White Sand identification connects directly to the stated Wilsonart D403 White Sand 60 Matte color match, giving fabricators a clear target when coordinating sheet goods and edges in the same project. The 600 foot roll length described in the SAP text supports planning for batch work, allowing calculations of linear edge coverage from a single SKU. The PVC material classification places it alongside typical edgebanding tools and adhesives used in cabinet and fixture shops, so it integrates into established edging workflows.
The Wilsonart D403 White Sand 60 Matte color match noted in the web description positions this band for projects using that specific laminate pattern, so faces and edges can read as a coordinated set. The light White Sand tone works with that matte finish to keep seams visually quiet on casework and panels. The edge banding and surfacing classification means this product sits naturally in laminate-based cabinetry, countertops, fixtures, and similar assemblies where a PVC edge is standard practice. Because the band is .018 inch thick, it performs well where a slim edge profile is important, such as doors, drawer fronts, and vertical panels that are seen up close. The 15/16 inch width gives coverage on common panel builds in these applications, supporting alignment on both vertical and horizontal edges in the same job.
The Doellken Woodtape brand connection matters when shops want predictable behavior during banding, because it ties this product to a recognized line of PVC edge materials. The .018 inch thickness lets edge trimmers, scrapers, or similar finishing tools work with a relatively thin band, helping reduce the visual step between the Wilsonart D403 White Sand 60 Matte face and the edge. The 15/16 inch width gives operators enough material to center the band over the core without precision clamping at the absolute edge, which streamlines handling on repetitive runs. The 600FT/RL detail means larger cabinet or fixture packages can often be completed from a single roll, which helps keep color and gloss level consistent across all exposed edges. Together, the color match, thickness, width, and roll length help installers repeat the same setup from part to part, limiting rework due to mismatched edges or exposed substrate.
Edgebanding 9340 White Sand is classified as PVC edge banding, which places it with common plastic edging materials used alongside laminate panels in cabinet and fixture shops.
The .018 inch thickness creates a relatively thin PVC edge, so trimming and scraping leave a subtle transition between the panel face and the edge, useful on visible cabinet fronts.
The 15/16 inch width covers standard panel edges with extra margin, giving installers room to trim flush without risking exposure of the core material along the finished edge.
The web description states a color match to Wilsonart D403 White Sand 60 Matte, aligning the band color with that laminate so faces and edges coordinate visually on completed work.
The 600FT/RL detail shows each roll provides extensive linear footage, so larger cabinet or fixture runs can be handled with one continuous supply under a single part number.
The 9340-1518-1 manufacturer part number identifies this exact White Sand .018 inch thick by 15/16 inch wide Doellken Woodtape edge banding for reordering and specification.
The Edgebanding 9340 White Sand from Doellken Woodtape combines a .018 inch PVC profile, 15/16 inch width, and 600 foot roll length with a stated Wilsonart D403 White Sand 60 Matte color match. That combination lets cabinet and fixture shops align faces and edges under one defined part, 9340-1518-1, and run consistent edging across multiple components. For projects built around this Wilsonart tone, choosing this edge banding supports a unified appearance and a repeatable workflow using a single, clearly identified SKU.