PVC Edgebanding, Color 30188AAM Veranda Teak, 0.020" Thick 15/16" x 600' Roll

PVC Edgebanding Veranda Teak For Matching Runs

PVC edgebanding Veranda Teak from Doellken Woodtape provides a color-specific edge solution for projects that use the Veranda Teak decor, so cabinet and panel edges visually carry the same design across every run. The 15/16 inch width covers typical panel thicknesses with enough margin for standard trimming, helping edges finish clean to the face material. The 0.020 inch thickness gives a low-profile edge that suits light-duty and decorative applications where a thinner band aligns with the panel look. The 600 foot roll format supports longer production runs or multi-job use from a single coil, which reduces time spent changing rolls during repetitive edging work. The color match reference to Wilsonart 8209K Veranda Teak 28_Glossli - Good ties this edge directly to a known laminate pattern, so shop planning for that surface can align edge material with the intended decorative face.

Key Veranda Teak Edgebanding Details For Shops

• The 15/16 inch width spans standard board thicknesses with trim allowance, helping edgebanders and trimmers remove slight overhang while leaving a flush, finished edge on laminate or board faces.
• The 0.020 inch thickness creates a thin edge profile that blends closely with the panel surface, which suits lighter-duty cabinetry or decorative work where a subtle edge line is preferred.
• The 600 foot roll length supports extended edging runs, allowing shops to process many cabinet parts or multiple projects in the same Veranda Teak design without frequent roll changes.
• The Doellken Woodtape brand identifies it as part of a recognized PVC edgebanding line, helping shops keep material families consistent across different colors and decors in their inventory.
• The manufacturer part number 30188AAM-1520-1 and SAP description 15/16X.020 EB, VERANDA TEAK 600FT/RL give precise ordering references, reducing the chance of pulling a different color or size when reordering.
• The stated color match to Wilsonart 8209K Veranda Teak 28_Glossli - Good links this banding to a specific decorative surface, simplifying material coordination when building jobs around that laminate design.

Edgebanding Size And Roll Format For Workflow

The 15/16 inch x 600 foot roll sizing provides both coverage and throughput for cabinet and fixture work using Veranda Teak designs. At 15/16 inch wide, the PVC edge banding spans typical 3/4 inch panels with working overhang, which suits common edgebanding equipment that trims excess back to the face. The 0.020 inch thickness keeps the edge slim, which can support a neat transition where the face material and edge are meant to read as one continuous surface. The 600 foot roll length supports longer production sequences around this single color, which helps shops schedule a dedicated Veranda Teak run without stopping to change coils midstream.

Using Veranda Teak PVC Edge Banding In Projects

Where This Veranda Teak Edge Banding Fits Best

This PVC edgebanding, color 30188AAM Veranda Teak, aligns with projects that specify the Veranda Teak decor on cabinet fronts, casework, or panels. The reference to Wilsonart 8209K Veranda Teak 28_Glossli - Good means it is oriented toward applications using that decorative surface, so doors, drawer fronts, and visible carcass edges can follow the same pattern family. As an edge banding in the Edgebanding & Surfacing category, it belongs in woodworking environments where laminate or similar sheet goods require finished edging rather than exposed core. The 0.020 inch thickness and 15/16 inch dimension suit interior panel work where a matching design is more important than a heavy build edge, providing a coordinated appearance across the visible edges of cabinets and fixtures.

Why These Dimensions Support Consistent Results

The 15/16 inch width gives a workable margin over common panel thicknesses, supporting a consistent trim pass that leaves the Veranda Teak pattern cleanly aligned with the face material. This helps repeat the same reveal around doors, shelves, and cabinet sides. The 0.020 inch thickness keeps the edge closer to the plane of the laminate face, which helps avoid a bulky boundary line and supports a more seamless visual flow of the Veranda Teak design around corners. The 600 foot roll length allows the same color and batch to run across many parts, which supports color continuity from component to component in a kitchen or commercial installation. The defined manufacturer part number 30188AAM-1520-1 and SAP description 15/16X.020 EB, VERANDA TEAK 600FT/RL anchor this specification for repeat use, so once a shop dials in settings for this tape, the same configuration can be applied again on future orders.

Common Questions About Veranda Teak PVC Edgebanding

Select Veranda Teak Edge Banding For Matching Work

This Doellken Woodtape PVC edgebanding in color 30188AAM Veranda Teak, sized 15/16 inch x 0.020 inch on a 600 foot roll, ties directly to Wilsonart 8209K Veranda Teak 28_Glossli - Good for coordinated projects. The defined dimensions, roll length, and part identifiers support repeatable cabinet, panel, and fixture production whenever this specific Veranda Teak edge appearance is required across multiple jobs.