
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
15/16x3mm natural maple edgebanding from Doellken Woodtape is a PVC edge banding designed to finish exposed edges on panels, so cabinet and furniture projects can carry the natural maple look across doors, drawer fronts, and casework. The edge banding matches the tone identified as Natural Maple, which helps keep color consistent when you are running this alongside coordinating laminate faces. With a 3mm thickness, the banding builds a solid edge profile that can be machined and flushed to the panel, supporting a sturdy, finished feel on working edges. The 15/16 inch width gives enough coverage for standard 3/4 inch panels with a small overhang for trimming, which helps reduce edge show-through. As part of Doellken Woodtape edge banding, this product fits into shop workflows that rely on consistent PVC material behavior at the edgebander and trimmer.
This Doellken Woodtape edge banding is specified at 15/16 inch wide by 3mm thick, which lines up well with panel work where a bit of overhang is needed for trimming. That extra fraction over 3/4 inch means the installer can focus on consistent glue coverage and trimming rather than fighting short coverage. The product color is identified as Natural Maple, with a web description calling out a Formica 756 Natural Maple 58 matte color match rated as 880 Good, which signals that edge and surface will sit visually close when used together. The edge banding is classed as PVC, so it behaves like other PVC edgebanding in the shop, allowing setups based on known heat and feed parameters on typical edge processing equipment.
This edge banding is categorized as Edgebanding & Surfacing, Edgebanding, PVC, which places it directly in cabinet and furniture edge finishing work. The Natural Maple designation ties it to projects built around that maple visual, from case interiors to fronts that rely on a matching edge. Because the web description references a Formica 756 Natural Maple 58 matte color match rated 880 Good, it fits especially well where that specific laminate decor is part of the job, helping panel faces and edges read as a single coordinated surface. The 15/16 inch by 3mm format supports use on standard sheet goods where installers want a slightly heavier edge, such as doors, drawer fronts, or shelves that benefit from a solid-looking edge line.
The 15/16 inch width gives practical trimming allowance around typical 3/4 inch cores, which reduces the chance of exposed substrate after machining and helps keep edges visually tight. With a 3mm thick PVC build, the material offers enough substance for clean profiling or light corner easing after trimming, supporting a finished edge that aligns with higher-use cabinet areas. The fact that the web description calls out a Formica 756 Natural Maple 58 matte match at an 880 Good rating provides a clear indication that this edge banding aligns closely with that decorative surface, which helps limit visible transitions between face and edge on finished runs. Being part of the Doellken Woodtape edge banding line means the product follows that manufacturers approach to PVC edge materials, which supports repeatable handling on equipment already tuned for similar Doellken sizes and colors.
The 8820 Natural Maple edge banding is classified under Edgebanding, PVC, so it uses PVC construction, which supports standard PVC edgebanding processing on cabinet and furniture projects.
This edge banding is 15/16 inch wide, giving overhang beyond 3/4 inch panels so installers can trim back to a flush, clean edge without exposing the board core.
The 3mm thickness builds a heavier PVC edge that can handle profiling and light radius work, so finished cabinet edges present a solid, substantial look and feel.
The web description lists a Formica 756 Natural Maple 58 matte color match rated 880 Good, indicating the edge color sits close to that decorative surface in normal viewing.
Doellken Woodtape identifies a specific edge banding line, so shops running other Doellken PVC sizes can apply similar equipment setups and expectations to this product.
The 8820-1503-1 manufacturer part number ties to this Natural Maple, 15/16x3mm PVC edge banding, helping buyers and installers reference the exact color and size.
The 8820 Natural Maple Doellken Woodtape PVC edge banding pairs a 15/16 inch by 3mm size with a Natural Maple tone, aligning with the Formica 756 Natural Maple 58 matte decor at an 880 Good color match. That combination supports cabinet and furniture work where edge coverage, thicker profiles, and coordinated maple visuals are important. For projects built around that laminate pattern or similar maple looks, this banding offers a consistent way to carry the design across panel edges. Order this 8820-1503-1 edge banding from Wurth Baer Supply to align color, size, and material with your current edgebanding workflow.
Sold In: 328 Lineal Ft