Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding Earthen Warp is a Doellken Woodtape edge banding that covers and protects exposed panel edges, so finished work presents a uniform look around the entire piece. The PVC construction provides a stable edging material along the full 600 foot roll length, which supports consistent runs on larger cabinet or fixture projects without constant roll changes. The 15/16 inch width is sized to cover standard panel thicknesses with workable trim allowance, helping installers dial in a tight edge profile. At 0.018 inch thick, this banding adds a slim edge that blends closely with laminate without creating a bulky edge line. Color 6455 Earthen Warp is matched close to Formica 5880 Earthen Warp in 58 matte finish, so edges align visually with that surface in typical casework applications.
This Doellken Woodtape PVC edge banding is supplied as a 15/16 inch wide strip, which aligns well with common panel thicknesses used in laminate casework and allows straightforward setup on typical edgebanding equipment. The 0.018 inch nominal thickness gives installers a thin, manageable edge that responds predictably during trimming and finishing steps, supporting smooth passes with standard edge trimmers. Because the banding is PVC, it behaves consistently along the 600 foot roll in normal shop conditions, helping maintain similar feed and cut settings across a job. The extended roll length also supports machine setups where operators aim to run multiple components in the same color without frequent reloads.
This PVC edgebanding, color 6455 Earthen Warp, is intended as edge treatment for panels where a close match to Formica 5880 Earthen Warp in 58 matte is desired, such as casework, cabinets, or fixtures using that decorative surface. The 15/16 inch width spans the edge of panels that correspond to common board thicknesses, providing coverage with allowance to trim back to the face laminate on both sides. With a 600 foot roll, the material supports repeated use on multiple cabinets, runs of shelving, or matching doors and drawer fronts that share the same laminate design. The close color relationship to the Formica reference helps the edge visually continue the surface pattern around corners, which matters when building coordinated installations or repeating the same specification across multiple spaces.
The 0.018 inch thickness of this Doellken Woodtape edge banding keeps the edge slim, which helps installers create a transition that feels close to flush once trimming is complete, instead of a heavy or proud edge. That thin profile supports precise trimming with standard knives or routers, because there is less material to remove to reach the laminate face, which can streamline finishing passes. The 15/16 inch width provides enough overhang beyond typical panel thicknesses to accommodate small alignment variations during application, then be trimmed back cleanly to the surface. Over a 600 foot roll, these consistent dimensions help maintain similar setup parameters from part to part, reducing adjustments between components that use the same panel build.
This Doellken Woodtape PVC edgebanding is 15/16 inch wide and 0.018 inch thick, supporting coverage of standard panel edges while allowing trimming back to a clean, flush edge.
The edge banding roll is 600 feet long, which supports extended runs of cabinets or fixtures in the same color without frequent material changes.
Color 6455 Earthen Warp is matched close to Formica 5880 Earthen Warp in 58 matte, helping edges visually align with that decorative surface.
This edge banding is made from PVC, providing a consistent edging material across the 600 foot roll during typical shop installation and trimming processes.
This PVC edgebanding is manufactured by Doellken Woodtape, identified by manufacturer part number 6455-1518-1 for this specific color and size.
The 0.018 inch thickness creates a slim edge that trims quickly to the laminate face, which supports smooth transitions and efficient finishing passes on doors and panels.
The Doellken Woodtape PVC edgebanding Earthen Warp in 15/16 inch width and 0.018 inch thickness provides a close color relationship to Formica 5880 Earthen Warp 58 matte, so edges follow the same visual story as the surface. With a 600 foot roll length, this product supports both single projects and repeat jobs using the same specification. For laminate-based cabinets, fixtures, or casework where that Formica design is present, this edge banding offers a dedicated option for covering exposed edges with a coordinated appearance.