PVC edgebanding in color 6457 Citadel Warp gives you a defined edge solution that matches surfaces specified in this tone, so finished parts keep a consistent look from face to edge on woodworking and laminate projects. This Doellken Woodtape edge banding is 15/16 inch wide, covering standard panel thickness while allowing trim margin, which supports a clean knife or router pass without exposing core material. The 0.018 inch thickness creates a low-profile edge that follows panel lines closely, helping projects stay visually light while still defining the perimeter. Supplied in a 600 foot roll, this product supports longer production runs and repeat work in the same color without frequent material changeovers. The color is specified as a good color match to Formica 5882 Citadel Warp 58 matte finish, so projects using that laminate can carry the design over the edge for coordinated casework, shelving, or fixtures.
This Doellken Woodtape PVC edgebanding combines a 15/16 inch width with a 0.018 inch thickness, giving a narrow edge profile that still fully covers typical board edges once applied and trimmed. That width leaves workable overhang for trimming equipment, supporting predictable results across cabinet parts and flat panels. The 600 foot roll length reduces interruptions when feeding banding through edgebanders or manual setups, so operators can run longer sequences in Citadel Warp color before changing stock. With PVC construction in this specified size, the material tracks along panel edges in a controlled strip, helping maintain alignment from end to end during production.
This PVC edgebanding in color 6457 Citadel Warp fits applications where panels or components are designed around this specific tone, so edges visually follow the same color story. The Doellken Woodtape brand and edge banding product class place it squarely in woodworking and surfacing workflows, particularly where laminate and board edges need a defined finish. The 15/16 inch width suits many panel builds that aim to hide core material without oversizing the edge, helping casework and fixtures maintain clean lines. Because the color is described as a good color match to Formica 5882 Citadel Warp 58 matte, it works well alongside that laminate in coordinated projects, letting fabricators carry the matte Citadel Warp look from horizontal or vertical faces right over the edge.
The 0.018 inch thickness of this PVC edgebanding matters on the bench because it yields an edge that is slim enough to keep profiles subtle, yet defined enough to read as a finished boundary on doors and panels. When that thickness is paired with a 15/16 inch width, it supports trimming workflows that start with slight overhangs and end with flush, covered edges. The 600 foot roll length matters in active shops, as it supports batches of parts all using the same 6457 Citadel Warp color without mid-job roll changes, which can streamline cutting lists. The specified good color match to Formica 5882 Citadel Warp 58 matte gives designers and fabricators a direct path to align edges with that laminate selection, so the edge treatment supports the design intent of Citadel Warp surfaces across cabinetry, counters, and built-ins.
This PVC edgebanding is 15/16 inch wide, so it covers typical panel edges while allowing a small trim margin to finish the edge flush without exposing the core.
The Doellken Woodtape Citadel Warp banding is 0.018 inch thick, giving a slim edge profile that closely follows the panel surface for a subtle finished boundary.
The 6457 Citadel Warp PVC edgebanding roll is 600 feet long, supporting multiple parts or project runs in the same color before changing material.
The 6457 Citadel Warp color is described as a good color match to Formica 5882 Citadel Warp 58 matte, supporting coordinated faces and edges in that design.
This Citadel Warp edge banding is PVC, aligning with typical edgebanding materials used in cabinet, fixture, and laminate-based woodworking projects.
The manufacturer part number for this edgebanding is 6457-1518-1, which identifies this specific Citadel Warp, 15/16 inch by 0.018 inch by 600 foot product.
This Doellken Woodtape PVC edgebanding in color 6457 Citadel Warp, sized at 15/16 inch by 0.018 inch in a 600 foot roll, aligns edge treatment with Citadel Warp design choices. For projects using Formica 5882 Citadel Warp 58 matte, the specified good color match helps extend that look across casework and panels. Choosing this roll through Wurth Baer Supply supports consistent edge color, predictable dimensions, and uninterrupted runs whenever Citadel Warp is part of the project palette.
Sold In: 600 Lineal Ft