Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 8616 Zulu is a PVC edge banding designed to finish panel edges so they visually align with Nevamar WZ0053 Zulu laminate. The .018 inch thickness creates a slim edge that works well on cabinet and furniture parts where a low-profile band is preferred. The 15/16 inch width gives coverage for common 3/4 inch board edges while leaving workable trim margin for flush-routing or scraping. The PVC material provides a uniform, consistent surface along runs, which supports clean machining and an even look on doors, shelves, and partitions. The manufacturer part number 8616-1518-1 identifies this specific Zulu color and size combination, helping shops repeat the same edge match on future jobs and service work. The 600 foot roll length supports longer production runs and reduces changeovers on edge banding equipment during cabinet or fixture builds.
The 15/16 inch width on Edgebanding 8616 Zulu suits projects using panels near 3/4 inch thickness, giving the overhang needed for clean trimming without excessive waste. The .018 inch thickness works with equipment set up for thin PVC edge banding, so pressure roller and trimming stations can be dialed for light material removal. The color match to Nevamar WZ0053 Zulu ties this edge banding to laminate jobs using that specific decor, allowing casework, counters, or fixtures to maintain a continuous appearance from surface to edge. The identified product class as edge banding confirms its role at the perimeter of boards, helping protect raw substrate edges while completing the visual design of laminate projects.
Edgebanding 8616 Zulu is positioned for use on laminate-based work where Nevamar WZ0053 Zulu decor is specified, so edges and faces share a coordinated appearance. On cabinet runs, the 15/16 inch PVC band can be applied to doors, drawer fronts, and end panels cut from Zulu laminate-faced board, allowing all visible edges to present the same color tone as the flat surfaces. In commercial casework, the color match supports consistent edges on worktops, partitions, and shelving built with Nevamar WZ0053 Zulu, which helps designers carry a single color story across the installation. Because it belongs to the edge banding product class, this material serves at the transition between decorative surfaces and core material, supporting both aesthetics and edge protection on Zulu-based components.
The combination of .018 inch thickness and 15/16 inch width on Edgebanding 8616 Zulu allows installers to balance coverage and efficiency, since the narrow, thin PVC band requires minimal trimming while still overlapping panel edges adequately. This sizing helps reduce time at the trimmers and scrapers on edgebanding machines, which can improve throughput when running repeated cabinet or fixture parts. The Zulu color alignment with Nevamar WZ0053 gives fabricators a defined match point when specifying edges for that particular laminate, reducing guesswork in color selection on drawings and cut lists. With manufacturer part number 8616-1518-1 tied to this exact width, thickness, and color, shops can reorder the same banding for add-on work or field replacements, keeping edges visually in step with existing Zulu installations. The 600 foot roll further contributes to consistent results by supporting long, uninterrupted runs on automated edgebanders, reducing splices and keeping color flow uniform across large projects.
Edgebanding 8616 Zulu is classified as PVC edge banding, so it provides a homogenous plastic edge that machines consistently on edgebanders and finishing equipment.
Edgebanding 8616 Zulu has a 15/16 inch width, giving coverage beyond typical 3/4 inch panels to allow controlled trimming for a flush, clean finished edge.
This Zulu edge banding is .018 inch thick, providing a thin profile that requires light trimming and suits applications where a low-build edge is preferred.
This edge banding is described as a color match to Nevamar WZ0053 Zulu, helping edges visually coordinate with that specific laminate decor in finished work.
Manufacturer part number 8616-1518-1 identifies this exact Doellken Woodtape PVC edge banding in Zulu color at .018 inch thickness and 15/16 inch width.
Each listing for Edgebanding 8616 Zulu specifies 600 feet per roll, supporting extended runs and repeated cabinet or casework components in a single color.
Edgebanding 8616 Zulu from Doellken Woodtape pairs .018 inch thick, 15/16 inch wide PVC with a color match to Nevamar WZ0053 Zulu, giving cabinet and casework shops a defined solution for finishing Zulu laminate edges. Using the identified 8616-1518-1 part number when ordering supports consistent repeatability on current builds and future additions that need to track the same edge appearance. For projects built around Nevamar WZ0053 Zulu, this dedicated edge banding helps carry the decor across all visible edges while supporting efficient trimming on production equipment.