Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding aged ash is a Doellken Woodtape edge banding that covers and protects exposed substrate edges on casework, doors, and panels. The 0.020 inch thickness gives a low-profile edge that matches thin laminate faces, which helps panels look uniform. The 15/16 inch width works with standard 3/4 inch panels and slight overhang, giving room to trim flush without exposing core. A 600 foot roll suits production runs and repeat jobs, so long stretches of cabinets or fixtures can be processed without frequent roll changes. The aged ash color is designed as a color match to Formica 8844 Aged Ash WR, so the edge visually continues the laminate surface. Allegra embossing adds texture that echoes wood character on the edge, which supports a more realistic wood appearance along doors and shelves.
The 0.020 inch thickness of this Doellken Woodtape PVC edge banding works well where a thin edge is preferred, which helps edgebanders dial in heat and pressure settings around lighter material. The 15/16 inch width provides workable coverage over standard 3/4 inch substrates with slight excess, helping trimming units cleanly shave to the face without revealing the core. With 600 feet on a roll, edgebander payoff setups can stay active through sizable projects, supporting longer continuous feeding runs. These dimensions allow consistent edge coverage along cabinet sides, shelves, and doors that are sized around common 3/4 inch sheet goods.
This PVC edgebanding, in color 8301AA Aged Ash with Allegra embossing, fits work where panels are surfaced in Formica 8844 Aged Ash WR laminate, because the banding is specified as a color match to that design. The 15/16 inch by 0.020 inch profile suits cabinet boxes, closet parts, and similar casework cut from 3/4 inch stock, as the width covers the core while allowing trimming. On doors and drawer fronts, the thin PVC helps maintain tight gaps and reveals, since the 0.020 inch thickness avoids adding excess bulk at the edge. The Allegra embossing supports use on wood-inspired laminate programs where a subtle texture on the edge helps the component look closer to wood, which can be important in commercial and residential installations that emphasize coordinated surfaces.
The specified 0.020 inch thickness from Doellken Woodtape allows edgebanders and trimmers to run with predictable material response, which matters when dialing in flush trimming and scraping for repeatable finishes across many parts. The 15/16 inch width gives tolerance for panel size variation while still covering the edge after trimming, helping avoid exposed substrate at corners and ends. A 600 foot roll supports consistent color and texture across a job, since long sequences of parts can be edged from the same run of material. The color designation as a match to Formica 8844 Aged Ash WR helps designers and shops coordinate laminate faces and edges using a known pairing, simplifying repeat work and reorders using the same 8301AA-1520-1 part number.
This PVC edgebanding measures 15/16 inch wide, 0.020 inch thick, and is supplied in a 600 foot roll, which fits common 3/4 inch panel work with room for trimming.
This edgebanding has a color match to Formica 8844 Aged Ash WR, so its tone is aligned for use on projects using that laminate design on flat surfaces.
The Allegra embossing adds a textured surface to the PVC edgebanding, which supports a more woodlike look along the edge when paired with wood-pattern laminates.
This aged ash PVC edge banding is produced by Doellken Woodtape, giving a defined source and part family for repeat jobs and future orders.
Part number 8301AA-1520-1 designates this specific Doellken Woodtape PVC edgebanding in aged ash color 8301AA at 15/16 inch by 0.020 inch by 600 feet.
The 15/16 inch width works well for 3/4 inch panel constructions, providing slight overhang so trimming equipment can finish the edge flush to the laminate face.
This PVC edgebanding aged ash from Doellken Woodtape combines a 0.020 inch thickness, 15/16 inch width, and 600 foot roll length to support steady casework production. The specified color match to Formica 8844 Aged Ash WR and Allegra embossing help finished cabinet and panel edges align visually with that laminate program. Using part number 8301AA-1520-1 on orders ties repeat projects to the same aged ash tone and texture, supporting consistent results across multiple runs.
Sold In: 600 Lineal Ft