Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Snap LED 15W Warm White Panel Sample Kit is a Tresco Lighting LED panel system built for layout flexibility and consistent warm illumination. Each 12 inch by 12 inch square delivers 15 watts per square foot at 24 volts, giving a focused, low-voltage layout that suits shop-built cabinet, display, or furniture projects where power distribution is already planned around 24 volt drivers. The panel output of 900 lumens per square foot concentrates light into a bright working or accent zone, which helps when lighting interiors or tight spaces that need even coverage from a thin panel source. Individual 3 inch by 3 inch sections are only 1/16 inch thick, so they sit close to the mounting surface and free up clearance in shallow cavities, face frames, or tight reveals. The 120 degree beam spread throws light broadly from each square, creating overlapping patterns that reduce hot spots when panels are tiled on a larger surface.
The panel specification of 24 volts aligns the system with common low-voltage LED drivers, so installers can coordinate this Tresco Lighting panel with existing 24 volt planning in their projects. Because each 12 inch by 12 inch square is defined at 15 watts per square foot, it becomes straightforward to calculate total system load across a bank of panels before wiring. The per-square output rating of 0.5 watts per 3 inch section means that when panels are cut into smaller pieces, power calculations remain simple and predictable. With each 3 inch by 3 inch module only 1/16 inch thick, panels sit close to substrates such as cabinet backs or ceiling panels, which can ease routing of channels and reduce the need for deep cavities. The 120 degree beam spread supports wider spacing between panel groups while still overlapping light, which can save layout time when covering larger interior surfaces evenly.
The kit centers on a warm white 3000K LED output, which suits residential and commercial millwork where a softer tone is preferred near wood grain, stone, or painted finishes. At 900 lumens per square foot, the panel output can support both task and accent lighting inside cabinets and displays when tiled or grouped, giving designers flexibility in how much area each panel covers. The square 12 inch by 12 inch format lets installers align panels with standard cabinet widths, shelves, or casework bays, simplifying layout around familiar dimensions. Because every individual panel module is 3 inches by 3 inches and only 1/16 inch thick, fabricators can integrate lighting into shallow soffits, behind valances, or under thin substrates without major structural changes. The Tresco Lighting brand focus on LED panel lights places this sample kit squarely in applications where flat, low-profile lighting is preferred over point-source fixtures.
The defined 0.5 watt load per 3 inch square establishes a simple rule-of-thumb for trimming and arranging sections, allowing installers to retain control over both brightness and circuit loading as they customize shapes. With a rated lamp life of 50,000 hours, the panel design favors projects where long-term performance is important, such as built-in cabinetry and commercial displays that are not easily accessed after installation. The 120 degree beam spread allows panels to be mounted close to the lit surface while still distributing light broadly, which reduces the risk of banding when panels are placed near door fronts or shelf edges. The 24 volt rating keeps the system in the low-voltage category, which aligns with many existing LED power schemes in shops and field installations. Across the full 12 inch by 12 inch area, the 15 watt per square foot specification ties all of these details together into a predictable lighting module for repeat use across multiple jobs.
The Snap LED 15W Warm White Panel Sample Kit is an LED panel light system, suited to flat, low-profile lighting layouts in cabinets, displays, and similar casework.
The panel provides 900 lumens per square foot, giving a bright, even field that can serve as task or accent lighting when panels are grouped across a surface.
The panel is rated at 15 watts per square foot at 24 volts, so installers can size drivers and circuits around those specific load values.
Each individual panel section measures 3 inches by 3 inches and 1/16 inch thick, allowing installation in shallow recesses and tight millwork spaces.
The panel has a 120 degree beam spread, which helps create broad, overlapping light patterns over shelves, counters, or interior cabinet surfaces.
The Tresco Lighting panel is rated for 50,000 hours of lamp life, supporting long-term use in built-in cabinet and display installations.
The Snap LED 15W Warm White Panel Sample Kit from Tresco Lighting combines 15 watts per square foot, 900 lumens per square foot, and a 120 degree beam into a flat 3 inch by 3 inch module that is only 1/16 inch thick. With a 24 volt rating and 0.5 watts per 3 inch square, this system provides clear numbers for driver sizing and circuit planning on shop drawings. The 50,000 hour lamp life further supports long-term cabinet, display, and furniture lighting projects where consistent performance is expected over time.
Sold In: 1 Kit
