
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Snap LED 15W Daylight Panel Sample Kit provides a 15 watts per square foot LED panel layout, delivering defined light output across a 12 inch by 12 inch field so installers can plan consistent illumination in tight or irregular spaces. The 900 lumens per square foot rating concentrates useful light on working or display surfaces, helping projects reach target brightness without oversized fixtures. A daylight color temperature of 6,500K produces a cool, high-contrast appearance, which supports tasks or merchandising that benefit from crisp, neutral-looking light. The panel system operates at 24 volts, aligning with common low-voltage lighting runs so it fits into typical LED power setups. Each individual panel draws 0.5 watts per 3 inch square, enabling calculated load planning on longer runs. The panel format belongs to the Tresco Lighting Snap LED family, giving installers a consistent product class for repeat jobs.
The size of each individual panel is 3 inches high by 3 inches wide and 1/16 inch thick, which keeps the LED element extremely low profile for tight cavities and shallow recesses. That minimal 1/16 inch thickness lets installers place panels near surfaces without significantly building out cabinet or display depth. Each 3 inch square drawing 0.5 watts allows installers to count panels and quickly translate the total into system wattage. Operating at 24 volts supports use with low-voltage LED drivers commonly used in architectural and cabinet lighting, keeping wiring runs within standard low-voltage practices. The square 12 inch by 12 inch layout for a full field of panels gives a simple reference dimension when laying out panel grids in bays, sections, or modular casework spans.
The 3 inch by 3 inch size of each LED panel fits applications that demand small, repeatable light modules, such as segmented shelves or narrow casework sections. The 1/16 inch thickness helps in installations where interior clearances are constrained by doors, drawers, or sliding elements. The 12 inch by 12 inch overall square reference lets planners think in one-foot modules when spacing panels across larger cabinets or display areas. With 900 lumens per square foot available from the panel field, projects that need defined task or display light can be designed around a clear lumen-per-area figure instead of guesswork. The daylight 6,500K color temperature supports environments where a cool appearance is preferred, aligning the visual result across multiple locations that share the same specification.
The 15 watts per square foot specification gives installers a repeatable number for driver selection and load balancing from job to job, simplifying submittals and repeat ordering. Each 3 inch square using 0.5 watts means counts during takeoff directly translate to system wattage, supporting accurate planning for long or branched runs. The 24 volt operating requirement keeps the panel in the low-voltage class, which supports consistent wiring methods across a shop or field installation program. A rated 50,000 hours of lamp life means the LED source is designed for extended runtime, which is important when panels are built into millwork where later access would disrupt finished surfaces. The 120 degree beam spread from the panel face broadens the light pattern, helping designers achieve more even coverage when the panels are spaced according to the one-foot square layout. The Tresco Lighting Snap LED identification, combined with the L-SP15SAMP-65K-1 part number, ties each daylight sample kit to a defined product line, supporting standardization for future repeat projects.
Snap LED 15W Daylight Panel Sample Kit provides a 12 inch by 12 inch square field of 3 inch by 3 inch LED panels rated at 15 watts and 900 lumens per square foot for layout and planning.
The panel delivers 900 lumens per square foot at a 6,500K daylight color temperature, giving a bright, cool appearance that supports task or display applications needing higher clarity.
Each individual panel is 3 inches high by 3 inches wide and 1/16 inch thick, allowing use in shallow cavities and tight millwork spaces where depth is limited.
The panel system operates at 24 volts and is rated at 15 watts per square foot, with each 3 inch square drawing 0.5 watts for straightforward load calculations.
The LED panels have a rated 50,000 hours of lamp life, supporting long-term use in built-in installations where frequent lamp replacement would interrupt finished work.
The panel offers a 120 degree beam spread, helping distribute light broadly from each module and supporting more even illumination over adjoining surfaces.
Snap LED 15W Daylight Panel Sample Kit from Tresco Lighting pairs a 12 inch by 12 inch grid of 3 inch squares with 900 lumens and 15 watts per square foot, giving installers clear numbers for layout and power planning. The 24 volt design, 120 degree beam spread, and 6,500K daylight color temperature combine to support projects needing cool, evenly spread illumination. With a rated 50,000 hours of lamp life, this L-SP15SAMP-65K-1 sample kit serves as a practical reference when standardizing Snap LED panel specifications across future work.
Sold In: 1 Kit