Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Snap LED 8W Daylight Panel Sample Kit delivers 8 watts per square foot at 24 volts, so you can plan layouts around a known power load for each section of panel lighting. The panel output of 900 lumens per square foot provides bright daylight-level illumination for evaluating how surfaces, finishes, and work areas appear under 6500K light. A rated lamp life of 50,000 hours supports long-term projects, reducing how often you need to schedule lighting changes. Each individual panel section draws 0.5 watts per 3 inch square, giving you fine-grain control when you map power supplies and low-voltage runs. The 120 degree beam spread throws light broadly from each panel, helping you see coverage patterns during design work. With Tresco Lighting branding and part number L-SP8SAMP-65K-1, the kit aligns directly with the Snap LED panel system specification.
The Snap LED 8W Daylight Panel Sample Kit uses 3 inch high by 3 inch wide individual panels at 1/16 inch thick, giving you a low-profile lighting surface that sits close to mounting substrates. This thin format helps when working behind shallow reveals or inside tight cabinetry where depth is constrained. The 12 inch by 12 inch square configuration groups these panels into a regular grid, so measuring out attachment points and aligning panels to casework or architectural lines stays straightforward. Because each 3 inch square maintains the same 0.5 watt draw, you can expand or contract mounted coverage while preserving even power and light distribution across the surface.
The Snap LED 8W Daylight Panel Sample Kit, identified as 8W 1FT SQ SNAP PANEL 6500K SAMPLE KIT, is structured as a 12 inch by 12 inch square, so it fits naturally into foot-based planning grids often used in cabinetry, displays, and architectural details. Each individual 3 inch by 3 inch panel shares the same 1/16 inch thickness, providing a uniform, low-profile light source across the entire square. With a daylight color temperature of 6,500K, the panel shows surfaces in a cool, bright tone that can highlight fine detail during design evaluation. The 900 lumens per square foot output provides substantial light density within that 1 foot by 1 foot footprint, which is useful when testing how much illumination a similar field would provide in a larger run. Because every 3 inch square draws 0.5 watts from a 24 volt supply, you can extend concepts developed with this square into longer or more complex shapes while keeping power and brightness relationships consistent.
The combination of 8 watts per square foot and 900 lumens per square foot in the Snap LED 8W Daylight Panel Sample Kit gives a fixed watt-to-lumen relationship, helping you forecast energy use and brightness together on future installations. A 120 degree beam spread from each thin 3 inch panel allows light to wash broadly across surfaces, reducing strong edge lines when panels are placed close to diffusers or translucent materials. The 50,000 hour lamp life rating means the daylight 6,500K appearance remains available over many operating hours, supporting long-term visual consistency on projects built from the same panel type. Because each 3 inch segment always represents 0.5 watts within the 12 inch by 12 inch field, you can add or subtract segments in a design phase while keeping electrical load calculations straightforward. The consistent 1/16 inch thickness across panels simplifies layering with other materials, supporting repeatable alignment between this panel field and surrounding construction elements.
The Snap LED 8W Daylight Panel Sample Kit uses individual panels sized at 3 inches high by 3 inches wide and 1/16 inch thick, which helps when planning shallow recesses or tight spaces.
The Snap LED 8W Daylight Panel Sample Kit draws 8 watts per square foot overall, with each 3 inch square section using 0.5 watts, which simplifies driver and circuit planning.
The Snap LED 8W Daylight Panel Sample Kit operates at 24 volts, matching common low-voltage LED systems and aiding in selecting compatible power supplies.
The Snap LED 8W Daylight Panel Sample Kit provides 900 lumens per square foot, delivering strong illumination for evaluating lighting levels in design and layout work.
The Snap LED 8W Daylight Panel Sample Kit offers a 120 degree beam spread, which distributes light widely and helps reveal coverage patterns across nearby surfaces.
The Snap LED 8W Daylight Panel Sample Kit is rated for 50,000 hours of lamp life, supporting long-duration use when the same panel type is specified in projects.
The Snap LED 8W Daylight Panel Sample Kit from Tresco Lighting combines 8 watts per square foot, 900 lumens per square foot, and 6,500K daylight color in a 12 inch by 12 inch square, giving you a precise reference for planning future installations. With 3 inch by 3 inch segments at 0.5 watts each and 1/16 inch thickness, the kit supports accurate layout, power, and clearance decisions before committing to full-scale Snap LED panel fields.
Sold In: 1 Kit
