MDF Laminated Panels U129, Shadow Black, PET Panel, 2-Sided 8 mm Thickness, 84 x 108

MDF Laminated Panels U129 For Clean Shadow Black Surfaces

MDF Laminated Panels U129 give you an MDF core laminated panel in Shadow Black, so you get a consistent dark surface for cabinetry, fixtures, or millwork where a uniform color matters across every cut part. The PET panel construction means the face is laminated with a PET surface, so you are working with a ready-finished sheet rather than raw MDF that would otherwise need separate surfacing steps. This version is 2-sided, so both faces carry the Shadow Black PET layer, which keeps exposed interiors and exteriors visually aligned on doors, sides, and partitions. The 8 mm thickness provides a slimmer profile than standard carcass stock, which suits lightweight components, vertical panels, and decorative elements that do not need full carcass thickness. The 84 x 108 size gives a large panel area, which supports bigger parts and more efficient nesting from a single sheet.

Shadow Black PET MDF Panel Details That Matter

• The 8 mm thickness sets this panel up for applications where a thinner build is preferred, so you can reduce weight on vertical elements and achieve sleeker proportions on fronts or decorative panels.
• The 84 x 108 size provides a broad working area, so larger doors, tall partitions, or multiple smaller parts can be laid out to maximize yield from each panel during cutting and machining.
• The 2-sided construction means both faces are finished in Shadow Black PET, so visible interiors, cabinet exteriors, and open shelving maintain the same dark tone on each side of the sheet.
• The PET panel surface is factory laminated to the MDF, so you start with a finished face on both sides instead of planning separate surfacing steps, which streamlines your fabrication workflow.
• The Shadow Black U129 color code identifies a specific dark tone within the Cleaf range, so repeat orders of the same number support visual continuity across projects using this finish.

Using The 8 mm Shadow Black Panel In Builds

The MDF Laminated Panels U129 sheet combines an MDF core with PET surfaces, so you are working with a stable engineered substrate that already carries its decorative layer. The 8 mm thickness works well where a slim section is acceptable, so vertical divisions, back panels, or overlay fronts can keep a lighter profile while staying within the same finish family as thicker members. With both faces laminated in Shadow Black, cut-to-size parts present the same color on either side, which is useful for doors, partitions, and components that remain visible from multiple angles in the finished installation. The 84 x 108 panel size supports layouts for tall pieces and multiple smaller cuts from a single sheet, so panel optimization can be planned around a known, repeatable dimension.

Applying Cleaf Shadow Black MDF Panels In Projects

Where This Shadow Black PET Panel Fits Best

The MDF Laminated Panels U129 format is suited to cabinet and woodworking projects where a dark, uniform appearance is required on both faces of a panel. The Shadow Black U129 finish runs across the full 84 x 108 sheet, so tall doors, closet partitions, or wall panels can be cut without breaking the color field. Because the construction is PET laminated over MDF on both sides, parts like shelves, dividers, or overlay fronts maintain the same visual tone inside and out when installed in open or partially open configurations. The 8 mm thickness also supports use as a coordinated element alongside thicker structural members in the same color, so you can keep design continuity while varying thickness for function.

Details Supporting Consistent Results And Layout Planning

The defined 8 mm thickness gives a predictable build dimension when designing joinery, edge treatment, or panel reveals, so clearances and alignments can be planned around that single metric across all parts cut from the sheet. The 84 x 108 panel size offers a known starting rectangle for cut lists, which helps when mapping door sets, side panels, or repeated components to minimize offcuts. With PET laminated on both sides of the MDF core, every offcut from this sheet shares the same Shadow Black U129 surface, so small parts, fillers, or additional fronts can be sourced from the same material with consistent appearance. The Cleaf S.P.A. branding and U129 designation tie the sheet to a specific manufacturer and finish code, so future orders using the same description and part number maintain project continuity when expanding or repeating a design.

Common Questions About MDF Laminated Panels U129

Selecting This Shadow Black PET Panel For Work

The MDF Laminated Panels U129 sheet from Cleaf S.P.A. gives you an 8 mm, 84 x 108 MDF core panel with PET laminated Shadow Black faces on both sides, so parts cut from this sheet carry a uniform dark finish. The U129 designation ties color and finish to a defined Shadow Black tone, so multiple sheets can be used together within the same project while maintaining appearance. For cabinetry, fixtures, or millwork that call for a thinner panel in a consistent Shadow Black PET finish, this panel format keeps material selection straightforward and repeatable.