Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf vanity replacement drawer is a wood vanity replacement drawer made for vanity cabinet upgrades where the existing drawer needs to be replaced or built into a custom front. This Rev-A-Shelf vanity drawer is part of the vanity drawer system category and is sized at 11-7/16 inches wide, 18 inches deep, and 3-3/4 inches high. The drawer uses maple construction and arrives fully assembled, which can save shop time during cabinet prep. It is designed for 12 inch, 15 inch, and 18 inch face frame base cabinets, and it is designed for Blum BLUMOTION 563F4570B undermount drawer slides. Because this is sold without slides, buyers can match the drawer to the required undermount drawer slides and planned drawer front before installation.
Key specs to confirm: This wood vanity replacement drawer is listed at 11-7/16 inches wide, 18 inches deep, and 3-3/4 inches high. It is designed for 12 inch, 15 inch, and 18 inch face frame base cabinets and for Blum BLUMOTION 563F4570B undermount slides. Before purchase, confirm your cabinet opening, inside depth, face frame layout, and the slide model you plan to use. Also confirm the drawer front size and attachment method needed for your project, since the product is described as fully assembled and ready for the buyer to add slides and drawer front. Load rating, compliance details, and any installation tolerances should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled Rev-A-Shelf wood vanity replacement drawer with maple construction. Slides and drawer front are not included based on the verified product description.
What to verify before ordering: Check cabinet type, opening width, interior depth, face frame conditions, required slide model, and whether your project is using a 12 inch, 15 inch, or 18 inch cabinet application. Confirm that your chosen drawer front and mounting method match the drawer box and planned reveal.
A vanity drawer system like this is often chosen when a shop, installer, or serious DIY buyer needs a clean replacement inside an existing bath cabinet or is building out a vanity with a custom drawer front. The verified format matters here: this Rev-A-Shelf vanity replacement drawer is fully assembled, made from maple, and intended for face frame base cabinets. That means it can fit workflows where the buyer wants a ready-made drawer box rather than building one from raw stock.
One common pain point is matching a replacement vanity drawer to the cabinet opening without overbuying hardware that does not fit. This product helps narrow that decision because Rev-A-Shelf states that it is designed for Blum BLUMOTION 563F4570B undermount drawer slides. Another common issue is buying a drawer box without checking whether the cabinet style is face frame or frameless. This model is described for face frame base cabinets, so that point should be verified early in the project.
Buyers searching for a maple vanity drawer or replacement vanity drawer often also need to know whether the drawer arrives knocked down or assembled. In this case, the drawer is fully assembled and ready for the installer to add slides and a drawer front. That can reduce bench work and help maintain a consistent build process across multiple cabinet jobs. If your project references RS4VDO-12-1 or other related series sizes, confirm the exact cabinet opening and application rather than assuming the same fit across every vanity width.
The listed dimensions of 11-7/16 inches wide, 18 inches deep, and 3-3/4 inches high provide a concrete starting point for planning. Even with those verified measurements, buyers should still confirm side clearances, rear clearance, and front attachment details because those installation specifics are not fully listed in the verified data.
When comparing a wood vanity replacement drawer, buyers usually look at three practical factors: construction, prep time, and hardware compatibility. This Rev-A-Shelf vanity drawer gives a clear answer on all three points that are verified. It uses maple construction, it arrives fully assembled, and it is designed for a specific Blum BLUMOTION undermount slide model. That makes it easier to evaluate than a generic drawer box with unclear hardware fit.
Another useful comparison point is how much of the drawer package is included. Some buyers want a complete kit, while others prefer to choose their own hardware and front. This product is described as a drawer with no slides, and the buyer adds the drawer slides and drawer front. For cabinet shops and installers, that can support a more controlled build because the visible front can be matched to the vanity design already in progress.
Generic drawer options may leave open questions about cabinet type or installation intent. Here, the verified data identifies face frame base cabinets and 12 inch, 15 inch, and 18 inch applications. That does not remove the need to measure, but it does give a more direct fit path for buyers working on vanity cabinet replacements. If your project depends on weight capacity, code-related details, or exact mounting tolerances, those points should be confirmed through manufacturer guidance before ordering. Follow manufacturer installation guidance and local building requirements where applicable.
This Rev-A-Shelf vanity replacement drawer is sold without slides. The verified description says the buyer adds the drawer slides and drawer front.
This wood vanity replacement drawer is designed for Blum BLUMOTION 563F4570B undermount slides.
This vanity drawer system is designed for face frame base cabinets. Confirm your cabinet construction before ordering.
This Rev-A-Shelf vanity drawer is described for 12 inch, 15 inch, and 18 inch face frame base cabinets.
This wood vanity replacement drawer measures 11-7/16 inches wide, 18 inches deep, and 3-3/4 inches high.
This Rev-A-Shelf vanity replacement drawer is fully assembled according to the verified product description.
This vanity drawer system is described as ready for the buyer to add a drawer front, so the front should be confirmed as a separate item.
This maple vanity drawer uses maple construction based on the verified product data.
This replacement vanity drawer can work for that use if your cabinet opening, depth, face frame layout, and slide choice match the verified specifications.
This vanity drawer system should be matched to cabinet type, opening size, inside depth, slide model, and drawer front plan. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf vanity replacement drawer gives buyers a clear starting point for a face frame vanity cabinet project with a fully assembled maple drawer box. Before purchase, confirm the 11-7/16 inch width, 18 inch depth, 3-3/4 inch height, cabinet application, and the required Blum BLUMOTION 563F4570B undermount slides. Also verify that your order plan includes the separate drawer front and slide hardware, since this model is sold as the drawer box only. Careful measuring helps avoid fit issues and extra shop time.
Sold In: 1 Each