Fastcap 9/16 Tete a Tete PVC cover cap is a peel and stick cap that hides exposed fasteners, so finished panels and cabinets present a clean, uniform look around visible screw heads. The PVC cover caps are made from PVC, which gives a consistent surface that visually blends with PVC-based finishes in many shop-built components. The 9/16 inch diameter size gives coverage over standard screw heads while keeping the footprint tight, which matters where fasteners sit close to edges or details. This product is part of the Fastcap screw cover caps and washers category, so it is aimed at closing out visible fasteners rather than structural joining. The Fastcap branding ties it to a recognized line of finish caps, which streamlines product choice when matching other Fastcap finishing items on a job.
The 9/16 PVC peel and stick cover cap uses PSA adhesive-backed construction, so installers press the cap into place over the target fastener area during assembly or finishing. Because adhesive strength increases as it cures, the cap establishes initial tack on placement and then develops a stronger hold over time as it sits on the substrate. The peel and stick format eliminates separate wet adhesive steps, so the workflow fits straight into assembly lines where caps are applied quickly at the bench. The PVC material keeps the cap flexible enough to sit on typical cabinet and panel surfaces, which matters where faces are flat and need a low-profile visual finish around screw locations.
The product name describes this item as a Fastcap 9/16 Tete a Tete PVC peel and stick cover cap, so it is aimed at covering exposed screw heads and fastening points on finished panels and cabinet components. The 9/16 inch diameter stated in the Product Name and SAP Description defines the coverage circle, so it reaches beyond many common screw head diameters to mask both the head and minor chipping around the hole on cabinet sides or toe-kick fascias. Being part of the Fasteners category and the Screw Cover Caps and Washers product class, this cap slots into hardware layouts wherever a visible fastener would otherwise distract from laminate, veneer, or painted surfaces on casework or fixtures. Because PVC cover caps are referenced in the Web Description as available in solid, wood grain, and metal colors through the PVC sampler, the Tete a Tete color label helps shops tie this specific cap to a matching PVC finish sheet they already use on related surfaces.
The FC.SP.916.CC M2001 TETE A TETE manufacturer part number identifies an exact Fastcap pattern, so repeat orders pull the same 9/16 inch Tete a Tete appearance each time, supporting consistent visual results across projects and repeat runs. The Web Description notes that PVC cover caps use PSA adhesive-backed construction and that adhesive strength increases as it cures, so installers can rely on initial tack for placement while the longer-term hold develops as the job sits in the shop or on-site. The 9/16 inch diameter size, combined with placement over screw heads, creates a defined, repeatable circle that crews can align in rows, keeping hardware lines visually straight on cabinet interiors or fixture panels. Because Wurth Baer Supply positions this item in the woodworking-focused Fasteners category, it suits workflows where crews want a fast, clean-looking closure over mechanical fasteners on wood-based assemblies rather than leaving exposed screw heads.
The Fastcap 9/16 Tete a Tete PVC cover cap is a PVC peel and stick screw cover cap in the Screw Cover Caps and Washers class, so it serves as a finishing piece over exposed fasteners.
The Fastcap 9/16 Tete a Tete PVC peel and stick cover cap has a 9/16 inch diameter, so it covers typical screw heads and a small margin around the hole on cabinet and panel surfaces.
The PVC cover caps are PSA adhesive-backed and the Web Description states adhesive strength increases as it cures, so the bond develops beyond the initial tack after the cap is pressed in place.
This item is listed in the Fasteners category and the Screw Cover Caps and Washers product class, so it fits where a visible fastener needs a finished appearance rather than a structural change.
The FC.SP.916.CC M2001 TETE A TETE manufacturer part number identifies a specific Fastcap 9/16 inch PVC cover cap pattern, which supports consistent reordering of the same finish look.
The Web Description states that PVC cover caps come in two diameter sizes, 9/16 inch and 11/16 inch, so this product represents the 9/16 inch option within that size range.
The Fastcap 9/16 Tete a Tete PVC peel and stick cover cap combines a defined 9/16 inch diameter with PSA adhesive-backed construction, so it offers a straightforward way to conceal exposed screw heads on cabinets and panels. The manufacturer part number FC.SP.916.CC M2001 TETE A TETE and the 9/16 inch sizing give clear identifiers when specifying this item through Wurth Baer Supply for repeat shop or field use. For projects built around visible fasteners on wood-based assemblies, this Fastcap PVC cover cap provides a dedicated finishing step that aligns with the Screw Cover Caps and Washers product class.