Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Fastcap 9/16 Tea for Two PVC cover cap is a peel and stick screw cover designed to hide exposed fastener heads in woodworking and cabinet projects. The PVC material forms a thin, flexible cap over the screw or fastener, so the hardware visually disappears into the Tea for Two color surface. The 9/16 inch diameter size targets standard screw head footprints, helping the cap sit neatly inside typical layout spacing. Being part of Fastcap screw cover caps and washers, this piece is intended for finishing work where visible screws would distract from the job. The Tea for Two color designation supports visual coordination with matching or similar PVC surfaces, which helps keep face frames, panels, and casework looking consistent across a run.
The PVC cover caps use PSA adhesive-backed construction, so each cap bonds to the surface through pressure-sensitive adhesive instead of mechanical fastening. The adhesive strength increases as it cures, which means initial tack holds the cap in place while the bond tightens over time. This behavior supports a straightforward press-on installation during assembly, then a more secure hold after the job leaves the bench. With a 9/16 inch diameter footprint, each cap is sized to sit over typical screw head locations, aligning visually with the fastener center while the adhesive layer grips the surrounding surface.
This Fastcap 9/16 Tea for Two PVC cover cap is classified under fasteners as a screw cover cap, so it fits naturally into cabinet, furniture, and casework builds where exposed screws are part of the construction. The PVC construction lets the cap sit over fastener heads on panels, face frames, and interior surfaces that remain visible after installation. Because the adhesive-backed design uses PSA to hold the cap, it works in locations where drilling or driving additional fasteners for concealment is not desirable. The Tea for Two PVC color aligns visually with surfaces finished in that tone, which helps doors, drawer fronts, and cabinet ends keep a unified appearance even when they rely on mechanical fasteners beneath. The 9/16 inch diameter suits screw patterns that require modest coverage without dominating narrow rails or stiles.
The PSA adhesive-backed structure lets installers press the PVC cover cap over each screw in a single step, which streamlines the close-out phase of a run of cabinets or fixtures. As the adhesive strength increases while it cures, the cap bond improves after initial placement, which supports transport and handling after assembly. The defined 9/16 inch diameter gives a consistent visual footprint from cap to cap, so rows of fasteners along cabinet interiors or underside panels look aligned and intentional. Working within the screw cover caps and washers class, this component slots into existing fastener choices at Wurth Baer Supply, allowing builders to pair screws and caps from a coordinated system. The specific Tea for Two color reference and FC.SP.916.CC M2006 TEA FOR TWO part number create a reliable standard for matching future expansions or service work to the original installation.
The Fastcap 9/16 Tea for Two PVC cover cap has a 9/16 inch diameter, so it covers standard screw heads with some margin around the hole, helping hide the head and nearby surface flaws.
The PVC cover caps use PSA adhesive-backed construction, so each cap presses onto the surface over the screw head, and the adhesive grip strengthens as it cures for a more secure hold.
The Tea for Two designation identifies a specific PVC color, allowing installers to coordinate the screw cover cap with matching panels, laminates, or edgebanding for a consistent finished appearance.
The manufacturer part FC.SP.916.CC M2006 TEA FOR TWO uniquely identifies this 9/16 inch Tea for Two PVC cover cap, helping repeat the same look on future jobs or repairs.
The PVC cover cap forms a thin, flexible layer over the screw head, allowing it to sit close to the panel surface and contribute to a smoother, more uniform finished look.
This Fastcap PVC cover cap is part of the screw cover caps and washers class, so it serves as the final step after fastening, concealing visible screws for cleaner cabinetry and casework.
The Fastcap 9/16 Tea for Two PVC cover cap pairs PSA adhesive-backed installation with a defined 9/16 inch diameter and a specific Tea for Two color, giving you a repeatable way to hide exposed screw heads. With a dedicated manufacturer part number FC.SP.916.CC M2006 TEA FOR TWO, it supports consistent ordering when you need the same finish across multiple projects or phases. For runs of cabinetry, fixtures, or casework that rely on visible fasteners, this screw cover cap provides a straightforward finishing step that tightens the overall appearance.