
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Iron-a-Way Non-Electric Ironing Center gives you a 42 inch swivel ventilated steel ironing board in a built-in cabinet, so ironing can stay set up without taking over work areas. The non-electric design keeps the focus on the mechanical function of the board, which suits locations where power is handled elsewhere. A ventilated steel board surface lets steam move through the board, helping fabrics dry during pressing. The cabinet is part of the Ironing Boards product class, so it is designed as a dedicated ironing station rather than general storage. A wood flat door with unfinished maple veneer lets the unit blend into millwork, because it can be finished to match surrounding cabinetry. Overall outside dimensions of 15 inches wide, 52 inches high, and 7-3/4 inches deep define the wall space this ironing center occupies.
The ironing center has outside dimensions of 15 inches wide, 52 inches high, and 7-3/4 inches deep, so installers can plan cabinet layout and wall stud spacing around a defined footprint. A rough-in opening size of 14-3/8 inches wide, 51-1/4 inches high, and 3-7/8 inches deep sets the cutout required in the wall, which guides framing and placement work. Outside door dimensions of 15 inches wide, 52 inches high, and 3/4 inch thick define the visible front panel, helping align adjacent doors and trim. Together, these measurements give clear boundaries for fitting the unit into a wall or cabinet run so the ironing center sits flush and operates without interference from surrounding components.
This ironing center belongs to the Kitchen & Bath Cabinet Accessories category and the Ironing Boards product class, positioning it as a built-in solution for rooms that also carry cabinet work. The cabinet format lets the ironing board live inside a recessed cavity, which suits laundry rooms, closets, or other service spaces where floor space is at a premium. The outside dimensions of 15 inches by 52 inches by 7-3/4 inches help the unit line up with tall cabinet sections or between studs in framed walls. The rough-in opening of 14-3/8 inches by 51-1/4 inches by 3-7/8 inches gives a specific target for cutting into drywall or paneling, helping the installer define the cavity before setting the unit. Because the door uses an unfinished maple veneer, the front can take stain or clear finishes that match nearby wood species, allowing the ironing center to follow the same visual language as custom cabinet fronts and trim in the room.
The 42 inch swivel ventilated steel ironing board creates a consistent station that stays anchored in the cabinet but can rotate as needed, so users can handle long garments or switch sides without relocating a freestanding board. Ventilation holes in the steel surface allow steam to pass through during use, reducing trapped moisture under fabrics and supporting even pressing performance over repeated sessions. A hot iron storage area inside the cabinet provides a defined spot for the iron when work pauses, which keeps the iron near the board while separating it from the active pressing surface. Storage shelves within the same cavity group related items in one vertical column, so pressing supplies and garments used in sequence can move directly between the shelves and the board. The full length piano hinge on the door stabilizes opening and closing across the entire 52 inch height, helping the door track consistently every time it is moved. The door thickness of 3/4 inch adds a solid front panel, which supports standard cabinet door proportions so the ironing center visually sits alongside other casework.
The ironing center has outside dimensions of 15 inches wide, 52 inches high, and 7-3/4 inches deep, which defines the wall space required for planning and layout.
The required rough-in opening is 14-3/8 inches wide, 51-1/4 inches high, and 3-7/8 inches deep, providing clear guidance for cutting and framing the wall cavity.
The ironing center uses a 42 inch swivel ventilated steel ironing board, offering a substantial surface length for shirts, pants, and other garments.
The door is a wood flat door with an unfinished maple veneer, allowing finishing to coordinate with surrounding cabinetry or trim in the installation area.
The ironing center has a hot iron storage area, giving the iron a dedicated resting place near the board while separating it from the active ironing surface.
The door uses a full length piano hinge, which supports the entire height of the door for smoother opening and closing across repeated use.
The Iron-a-Way Non-Electric Ironing Center 15 inch by 7-3/4 inch by 52 inch unit combines a 42 inch swivel ventilated steel board, hot iron storage, storage shelves, and an unfinished maple veneer wood door in a single built-in cabinet. With specified outside dimensions, rough-in opening size, and outside door dimensions, the ANE42WDU ironing center gives installers concrete measurements for planning wall cutouts and aligning with adjacent cabinetry. For projects that call for a dedicated ironing station integrated into millwork, this non-electric ironing center offers a defined format ready to be finished to match its surroundings.
Sold In: 1 Each