Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Silverado Series zinc 3 inch backplate describes a cabinet backplate from the Silverado collection, built for 3 inch center-to-center pulls so it supports standard handle layouts on cabinets and drawers. The Silverado collection is described as one of Hickory Hardware's most versatile cabinet hardware designs, so this backplate fits a wide range of cabinet styles where a coordinated look is important. The web description explains that this backplate will complement your decor whether you need it to renovate a medicine cabinet or update new kitchen drawers, so it serves both small bath projects and larger kitchen runs with the same visual language. The product name and category state that it is part of Belwith Keeler backplates in decorative hardware and moldings, which ties it into a recognizable hardware family when you are matching existing parts or planning a full room layout.
The stated 3 inch center-to-center measurement tells you this Belwith Keeler satin nickel backplate aligns with pulls drilled on a 3 inch pattern, so it fits common cabinet hardware layouts in kitchens and baths. The 5 inch overall length works with the 3 inch centers to leave overhang at each end, which gives additional coverage around the pull area on the door or drawer face. The projection of 1/8 inch keeps the part close to the surface, so the pull base sits against a shallow profile that does not significantly change hand clearance at the handle. The 7/8 inch width means the backplate covers a modest band of material above and below the mounting holes, which can be useful when you want more visual separation between the pull and the cabinet finish.
The web description states that this backplate can be used to renovate a medicine cabinet, so it is suited to small door faces often found in bathrooms where a slim hardware footprint is important. The same description notes that it also works for new kitchen drawers, which puts it into everyday cabinet and drawer applications across a full kitchen run. Being categorized under decorative hardware and moldings with a product class of backplates, Belwith, this P513-SN backplate is intended to sit behind a pull rather than act as a pull itself, so it contributes to the overall hardware look without changing how the door is grasped. The satin nickel finish aligns with finishes commonly specified on hinges, knobs, and pulls, which matters when you want the backplate to visually tie into other Silverado or Belwith Keeler pieces on surrounding cabinets.
The defined 3 inch center-to-center dimension means that when you use this P513-SN 3 inch cabinet backplate, the pull posts land exactly over the backplate opening, so repeated door and drawer fronts share the same hardware alignment. The 5 inch length combined with the 7/8 inch width creates a stable rectangular footprint behind the pull, which helps establish a consistent hardware border on each face for a uniform run. The listing of a 1/8 inch projection indicates a very low profile against the cabinet surface, so the pull remains the primary gripping point while the backplate handles visual framing rather than bulk. The product name, which specifies Silverado Series and satin nickel backplate, ties these dimensions to a specific design language, which is useful when you want repeatable results across replacements or matching installations in multiple rooms.
The backplate lists a 3 inch center-to-center dimension, so it is designed to sit behind cabinet pulls mounted on 3 inch hole spacing.
The stated 5 inch length extends beyond the 3 inch centers, so the backplate creates a longer visual bar that can better match wider drawers or doors.
The web description notes use for renovating a medicine cabinet, indicating the size and satin nickel finish are appropriate for typical bathroom cabinet doors.
The projection is listed as 1/8 inch, so the backplate stays low profile, allowing the pull to remain comfortable while still adding a framed look.
The 7/8 inch width forms a narrow band behind the pull, giving definition around the hardware without covering too much of the cabinet face.
The P513-SN backplate is part of the Silverado collection, described as one of Hickory Hardware's most versatile cabinet hardware designs.
This Silverado cabinet backplate satin nickel design uses a 3 inch center-to-center layout, so it pairs with standard pulls throughout kitchens, baths, and other cabinetry. The satin nickel finish, 5 inch length, and 7/8 inch width together create a defined frame that supports consistent hardware lines across doors and drawers. For projects that draw from the Silverado collection or other Belwith Keeler pieces, the P513-SN part number keeps this backplate tied to a known style family, helping cabinet runs carry the same hardware character from one opening to the next.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BWP577-SN Mfr# P577-SN | Hickory Hardware Silverado 3" (76 mm) Center to Center Satin Nickel Pull, P577-SN |