Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Williamsburg cup pull gives you a 3 inch center to center layout that aligns with standard cabinet drilling, which helps keep retrofit work straightforward on existing drawer fronts and doors. The pull uses a cup-style shape, so fingers catch the inside lip reliably when opening heavier drawers in a shop, office, or residential setting. Made from zinc, the cup pull provides a solid metal body that holds its shape under daily use on frequently operated fronts. The oil rubbed bronze highlighted finish adds a dark tone with lighter edges that helps this pull sit comfortably with many stained woods and darker painted finishes. With a 3-7/16 inch overall length and 1-11/16 inch width, the pull covers typical old mounting marks in many installations while still fitting comfortably on narrower drawer rails. A 1 inch projection provides enough finger clearance without sticking far off the face, which matters on tight walkways and closely spaced cabinets.
This 3 inch center to center cup pull is sized for common cabinet layouts, so it allows straight swaps on many existing drawers without altering the drilling pattern. The 3-7/16 inch overall length gives just enough overhang past the screw locations to bridge small chips or finish scars, which often appear when changing styles. With a 1 inch projection, the pull keeps fronts from feeling crowded, which is especially helpful on base cabinets or islands where people move closely past the faces. The 1-11/16 inch width adds visual weight without overwhelming narrower drawer rails, keeping runs of multiple pulls looking balanced. Its zinc construction and oil rubbed bronze highlighted finish pair metal strength with a finished surface that works equally well on stained or painted cabinets, so a single style can serve across mixed-room projects.
The oil rubbed bronze highlighted cup pull works well on cabinets where a dark, traditional look is preferred, because the finish combines a deep tone with lighter highlights that read well against wood grain and darker paints. In multipurpose rooms and dens, the 3 inch center to center spacing allows this pull to line up with typical storage drawer drilling, which helps keep banks of drawers consistent when some fronts are replaced. On kitchen and bath projects, the 3-7/16 inch overall length and 1-11/16 inch width give the pull enough presence to stand out on wider drawers while still remaining in scale on smaller doors. The 1 inch projection limits how far the hardware stands off the face, which matters on cabinets near traffic paths or tight corners. Because the pull is part of the Hickory Hardware Williamsburg collection, it can match other Williamsburg pieces where that collection is already in use.
The fixed 3 inch center to center measurement on this Belwith Keeler cup pull supports repeatable hole drilling across a run, which helps installers maintain straight visual lines on stacked drawers. Its 3-7/16 inch overall length places just a small shoulder past each screw location, giving enough coverage to hide slight drilling variations while still exposing finished fascia around the pull. The 1-11/16 inch width offers a broad gripping edge, which improves hand contact on heavier drawers without needing oversized hardware. A 1 inch projection balances clearance and compactness, so doors can open cleanly even when cabinets are opposite each other or near appliances. The zinc material provides a sturdy base for threads and mounting points, supporting long-term service on cabinets that are opened multiple times a day. The oil rubbed bronze highlighted finish visually coordinates with other dark decorative hardware and moldings, supporting cohesive lines when used across several rooms.
The Hickory Hardware Williamsburg cup pull uses a 3 inch center to center hole spacing, so mounting holes are drilled 3 inches apart, matching a standard cabinet hardware layout.
The P3055-OBH cup pull measures 3-7/16 inches in length and 1-11/16 inches in width, so it covers typical screw areas while remaining proportional on standard drawer fronts.
This oil rubbed bronze highlighted cup pull projects 1 inch from the cabinet face, providing usable finger clearance while keeping a low profile in tighter spaces.
The Hickory Hardware Williamsburg cup pull is made from zinc, giving it a solid metal body suitable for regular cabinet and drawer use.
The P3055-OBH Belwith Keeler cabinet cup pull uses an oil rubbed bronze highlighted finish, providing a dark tone with contrasting highlights on edges and details.
This 3 inch center to center cup pull is part of Hickory Hardware's Williamsburg collection, so it aligns with other Williamsburg pieces in that series.
The Hickory Hardware Williamsburg cup pull with 3 inch center to center spacing, zinc construction, and oil rubbed bronze highlighted finish offers a defined set of dimensions that suit many cabinet layouts. The 3-7/16 inch length, 1-11/16 inch width, and 1 inch projection give you predictable coverage and clearance across drawers and doors. For cabinet runs where matching hole spacing, finish tone, and pull proportions matter, this P3055-OBH cup pull from Wurth Baer Supply provides a focused option for both new installations and straightforward updates.