Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Newport Series zinc backplate from Belwith Keeler is part of the Newport collection, so it aligns with that family of decorative hardware when matching other pieces on a project. The backplate is made from zinc, which provides a solid metal base that holds up under everyday cabinet use in kitchens, baths, and built-ins. Its satin silver cloud finish delivers a muted metallic look that tones down glare, which helps the backplate sit visually behind pulls and knobs instead of dominating the cabinet face. At 3-3/4 inch length, the backplate gives pulls of similar length a proportional footprint on the door or drawer, which helps distribute contact on painted or stained wood surfaces. The 7/8 inch width creates a slim profile, so the backplate adds definition around the pull without crowding narrow rails or stile edges.
This Belwith Keeler backplate has a stated length of 3-3/4 inch and width of 7/8 inch, which gives installers predictable coverage around a pull mounted at its centerline. The 1/8 inch projection means the backplate adds only a slight stand-off from the door or drawer face, so the combined stack with a pull stays tight to the surface. With these dimensions, layout on typical cabinet rails is straightforward because the backplate stays inside common stile and drawer-front widths while still framing the pull. On finished wood or painted surfaces, the defined 3-3/4 by 7/8 inch footprint helps visually mask minor wear directly under the pull location over time.
The Newport Series, zinc 3-3/4 inch length, satin silver cloud backplate is suited to cabinet and furniture fronts where a coordinated Newport collection look is desired. Its 3-3/4 inch length pairs well with pulls of similar span on doors and drawers, giving a balanced proportion between the hardware and the backplate footprint. The 7/8 inch width is helpful on narrower drawer fronts or face-frame rails because it stays within the visible flat area while still outlining the pull base. In cabinetry that uses satin silver cloud or similar satin metal tones, the finish lets the backplate tie together knobs, pulls, and hinges visually along a run, supporting a unified appearance across upper and lower cabinets.
The stated 3-3/4 by 7/8 inch size of this P527-SC backplate defines exactly how much of the door or drawer face will be covered, which is important when positioning hardware over existing handle marks or finish variations. The 1/8 inch projection keeps the profile shallow, so the backplate does not add bulk under the pull, which helps maintain comfortable grip spacing for hands on doors and drawers. Using a zinc backplate under a pull places a full metal surface between the hardware base and the cabinet finish, which supports repeated opening and closing without the pull base bearing directly on the wood or coating. In multi-unit cabinet installations, repeating the same Newport collection backplate dimensions across all fronts simplifies layout, because hole locations and visual spacing share a consistent reference footprint.
The Newport Series P527-SC backplate measures 3-3/4 inch in length and 7/8 inch in width, so it provides a defined, compact footprint behind matching cabinet pulls or knobs.
The backplate has a projection of 1/8 inch, which keeps the hardware stack close to the cabinet face and preserves comfortable hand clearance around the pull.
The P527-SC backplate is made from zinc, giving a solid metal base under the pull that supports repeated door and drawer use on cabinets and furniture.
This backplate has a satin silver cloud finish, providing a soft metallic appearance that pairs with satin-toned cabinet hardware in the same installation.
The backplate is part of the Newport collection, so it coordinates with other Newport decorative hardware pieces on the same cabinetry project.
The P527-SC backplate is manufactured by Belwith Keeler, aligning it with their Newport Series decorative hardware line for cabinet projects.
The Newport Series, zinc 3-3/4 inch length, satin silver cloud backplate offers a defined 3-3/4 by 7/8 inch footprint with 1/8 inch projection, giving installers a predictable base under matching pulls. For cabinet or furniture runs using satin silver cloud tones and Newport collection pieces, this Belwith Keeler P527-SC backplate from Wurth Baer Supply supports consistent layout, coordinated appearance, and a metal contact surface behind each pull location.
Sold In: 1 Each