Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Belwith Keeler concealed hinge hangs inset doors that sit flush inside the opening of a frameless cabinet, with integrated soft-close and a Polished Nickel finish that holds up to view on high-detail work.
An inset door sits inside the cabinet box rather than over it, and the result depends entirely on an even reveal around the perimeter. This hinge carries the geometry for that: the full crank arm positions the door flush within the opening, and the 35mm cup bores into the back of the door at the standard depth. Because inset tolerances are tight, the screw-on mount rewards careful positioning. The hinge attaches to a base plate on the cabinet side, which is sold separately. For frameless construction the plate screws directly to the panel, with no face frame involved.
The hinge is steel with a Polished Nickel finish. On an inset door the hardware reads as part of the cabinet face whenever the door swings open, so finish consistency matters more here than on a full-overlay door where the hinge disappears behind the panel. Polished Nickel pairs naturally with chrome and bright nickel pulls and knobs, making this a practical choice when the rest of the cabinet hardware follows that palette. The soft-close mechanism protects the inset fit day to day: a door that lands hard in a tight gap puts wear on the edges, and the integrated damper removes that impact from every close.
This hinge is built for frameless cabinets only. It suits furniture-grade work, built-ins, and bath cabinetry where an inset, flush look is the specification and the finish has to earn its place on a visible hinge. Designers specifying hardware across a full room will find the Polished Nickel finish straightforward to coordinate. Cabinet shops running inset frameless doors can rely on the screw-on mount and standard 45mm boring pattern for consistent installation across a production run. For standard 16 to 22mm door stock, this hinge fits without modification. Thicker doors need a thick-door hinge with different geometry.
No. The hinge mounts to a base plate on the cabinet side, and that plate is sold separately. Use a plate matched to this brand and your cabinet construction.
Inset doors need a slight geometry adjustment compared to overlay doors, and 105 degrees is the correct opening for this configuration. It provides full everyday access without overextending the arm on a flush-fitted door.
No. The cabinet type for this hinge is frameless. For a face-frame cabinet, a face-frame mounting plate or a wrap-around hinge is the right approach.
The full crank arm carries the inset geometry that positions the door flush inside the cabinet opening. It is not a full-overlay arm; the crank is shaped specifically to place the door at zero overlay so the reveal is even all around.
Specify this hinge when the design calls for inset doors on frameless cabinets, a bright Polished Nickel finish that coordinates across the hardware package, and a close quiet enough to match the quality of the work.