Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Magnetic Catches 1-7/8" Center to Center from Belwith Keeler use a double stacked magnetic cabinet door catch design to help keep cabinet doors closed, so doors stay shut instead of drifting open during everyday use on your projects. The cadmium finish on this catch provides a coated surface, which suits cabinet environments where metal hardware is exposed at the frame. The catch body uses various materials in its construction, giving a practical mixed-material design that supports the magnet, housing, and strike contact area. With a length of 1 inch, this catch fits in compact spaces on the cabinet frame, which is helpful when working inside tight face frames or narrow rails. A projection of 3/4 inch sets how far the catch stands off the mounting surface, influencing alignment with the door strike. The 2-1/4 inch width gives a stable footprint, which matters when you want consistent contact as the door closes.
The 1-7/8 inch center to center mounting on this magnetic cabinet door catch defines the spacing between fastener points, so installers can mark and drill holes on cabinet frames with predictable repeat spacing. With a compact 1 inch body length, the catch can be positioned close to hinges or frame corners, which is useful on smaller doors where hardware space is limited. The 3/4 inch projection sets the working distance out from the mounting surface, so the mating door contact point can be located to match that offset. At 2-1/4 inches wide, the catch covers a broader area on the frame, which supports stable positioning during fastening and helps the double stacked magnetic areas line up consistently with the door edge.
This double stacked magnetic cabinet door catch is intended for cabinet doors, so it fits jobs where doors need help staying closed in normal service. The magnetic design supplies holding force at the frame, which is useful on doors without mechanical latches. With a 1 inch length and 2-1/4 inch width, the catch seats on typical cabinet rails or stiles, giving a stable mounting surface across many cabinet layouts. The 1-7/8 inch center to center spacing aligns with a wide frame area, allowing the catch to sit where the door edge naturally meets the frame. The cadmium finish suits cabinets where the catch may be visible at the frame edge, keeping the hardware appearance consistent from opening to opening. Because the catch belongs to the Catches collection from Belwith Keeler, it fits into projects that standardize on this style of cabinet catch across a run of casework.
The double stacked magnetic cabinet door catch configuration creates two stacked magnetic points, which increases the effective contact area at the door and supports more positive closing compared to a single small magnet. This helps hold doors shut after closing, which matters on cabinets that experience frequent use. The 3/4 inch projection determines the stand-off from the mounting surface, giving installers a known working distance when aligning the mating door plate within that range. With a 1 inch length, placement along narrow face frames remains flexible, so the catch can be located at the most effective point along the door edge. The 2-1/4 inch width helps resist slight twisting forces at the magnet area as the door engages, supporting smoother contact over time. The various materials construction provides a structured body around the magnet, which supports the magnetic element while interacting with the cadmium finish for a complete catch assembly.
The double stacked magnetic cabinet door catch is used on cabinet doors, providing magnetic holding at the frame so doors stay closed during regular operation.
The 1-7/8 inch center to center dimension sets the distance between mounting holes, so drilling and layout on cabinet frames can be done with consistent screw spacing.
The 3/4 inch projection defines how far the catch extends from the mounting surface, guiding where the mating door contact point should land for reliable magnetic engagement.
The catch uses a cadmium finish to provide a coated metal surface, which supports a consistent appearance on cabinet frames where the hardware remains visible at the opening edge.
The 1 inch length keeps the catch compact, allowing mounting on smaller cabinet rails or narrow face frames without crowding hinges or other hardware.
The 2-1/4 inch width spreads the catch across more frame area, supporting stable mounting and helping the magnet area stay aligned with the cabinet door edge.
The Belwith Keeler Magnetic Catches 1-7/8" Center to Center, cadmium catch offers a double stacked magnetic cabinet door catch layout that helps keep cabinet doors closed in everyday use. With defined dimensions - 1 inch length, 3/4 inch projection, 2-1/4 inch width, and 1-7/8 inch center to center mounting - this catch provides predictable layout points for installers planning cabinet hardware. The cadmium finish and various materials construction support a complete catch body suited to cabinet frames. For cabinet projects needing magnetic door retention using a compact catch footprint, this P151-2C catch provides a clearly defined set of working dimensions and finish details for accurate selection.