Magnetic cabinet door catch describes this Belwith Keeler catch that uses a magnet to help keep cabinet doors closed, which supports consistent door alignment on everyday-use cabinets. The catch is part of the Catches collection, so it fits typical latch-and-catch cabinet layouts where a positive closing point is needed. The statuary bronze finish defines the visible appearance, matching installations that call for a darker, traditional metal tone on exposed hardware. A 1 inch length keeps the body compact, so it fits on smaller face frames or tight cabinet interiors where space is limited. The 3/4 inch projection sets how far the catch extends off the mounting surface, which affects how the door-mounted strike meets the magnet during closing. The 2-3/8 inch width spreads the contact area across more of the frame, helping create a stable mounting footprint on wood cabinet rails or stiles.
The 1-7/8 inch center to center spacing defines where mounting fasteners land, which streamlines layout when transferring measurements to cabinet frames or interior partitions. The 2-3/8 inch overall width gives a clear reference for edge setbacks, helping position the catch so the magnet aligns with the door-mounted counterpart across multiple openings. A 3/4 inch projection from the mounting surface sets the working stand-off, which guides how far the door can move past the frame before the magnet contacts. The 1 inch length keeps the footprint short, so the catch sits cleanly on narrow rails or thin interior dividers without overhanging edges. Together, these dimensions give predictable geometry for repeatable installations across a run of cabinets using the same catch.
This Belwith Keeler magnetic catch is designed for cabinet doors where a magnetic pull is desired to help keep doors closed, so it fits general cabinet, furniture, or built-in millwork applications needing a simple closure point. The piece belongs to the Catches collection in the Locks and Latches category, which places it within standard cabinet catch hardware commonly used alongside hinges and knobs. With a 1 inch length and 2-3/8 inch width, the catch suits face frames, frameless cabinet sides, or interior partitions that can accept a low-profile rectangular body. The 3/4 inch projection allows use on both inset and partial overlay doors when the mating strike is positioned to match the magnet depth. The statuary bronze finish supports projects where a darker decorative hardware tone is preferred on visible cabinet components.
The 1-7/8 inch center to center mounting distance keeps the fastening points spaced for stability, which helps the magnetic cabinet door catch resist racking loads from doors opened and closed repeatedly. The 2-3/8 inch width works with this spacing to create a rectangular footprint, helping distribute forces into the cabinet substrate instead of concentrating them at a single point. The 3/4 inch projection defines the magnet face position relative to the mounting surface, so once the strike is located to match that projection, door closing becomes repeatable across multiple cabinets. The compact 1 inch length keeps the hardware clear of interior obstructions, which supports using the same catch pattern across cabinets with different storage layouts. The statuary bronze finish provides a defined surface appearance, so visible installs maintain a consistent look when several catches of the same model are used on a project.
The magnetic cabinet door catch has a 1 inch length, 2-3/8 inch width, 3/4 inch projection, and 1-7/8 inch center to center spacing, which defines its mounting footprint and working stand-off on cabinet frames.
The 1-7/8 inch center to center spacing sets the distance between mounting points, so installers can lay out pilot holes accurately and repeat the same pattern across multiple cabinet doors.
The 3/4 inch projection defines how far the catch extends from the mounting surface, which influences door gap and how the door-mounted strike meets the magnet during closing.
The statuary bronze finish sets a dark, traditional metal appearance, so the magnetic catch visually coordinates with other statuary bronze cabinet hardware on exposed installations.
The magnetic function helps keep cabinet doors closed by pulling the door toward the catch, which supports consistent shut positions on lighter doors used frequently.
The cabinet catch is from Belwith Keeler with manufacturer part number P649-STB, which defines its specific design, finish, and dimensional combination for selection.
This Belwith Keeler P649-STB magnetic cabinet door catch pairs a 1-7/8 inch center to center layout with a 2-3/8 inch width, giving a predictable footprint that suits typical cabinet frames. The 1 inch length and 3/4 inch projection create a compact shape that works in tight interiors while still presenting the magnet at a consistent depth to the mating piece. The statuary bronze finish supports projects built around darker decorative metal tones on visible hardware. For cabinet, furniture, or millwork work requiring a defined magnetic closing point, these verified dimensions and finish give a clear basis for selecting this catch.