Utility Hooks, Zinc 5/8" c/c, White Hook

DBL COAT HOOK 5/8 C/C White For Storage

DBL COAT HOOK 5/8 C/C white describes a Belwith Keeler Utility Hooks Series double hook made from zinc with a white finish, so it gives a clean, neutral look that works across many cabinet or closet layouts. This double hook design provides two hanging points, so one fitting handles more coats, bags, or gear in the same footprint. The decorative hooks product class and Utility Hooks collection identity mean it works as both functional hardware and a visible design detail on finished millwork. A length of 3-1/2 inches gives each arm enough reach to hold everyday items without crowding the mounting surface. The 2-7/8 inch projection sets the hook out from panels, helping hanging items clear door trim or face frames during use. A 1-1/8 inch width keeps the hook compact, so it fits tight spots such as cabinet ends, locker interiors, or narrow wall stiles.

Functional Details Of This Double Coat Hook

• The zinc material gives the hook a solid metal construction, which supports repeat daily hanging in residential or light commercial spaces without the flex seen in lighter materials.
• The white finish covers the zinc body with a neutral surface, which blends with painted cabinetry, white closet systems, and trim-focused projects where darker hardware would stand out.
• The double hook configuration provides two distinct hanging points, which lets one mounting location handle multiple garments, bags, or shop items to reduce clutter on adjacent surfaces.
• The 3-1/2 inch overall length spaces the upper and lower arms, which helps separate hanging items so they tangle less and stay easier to grab during quick use.
• The 2-7/8 inch projection sets the hanging point off the mounting plane, which helps items clear door swings or face frames in cabinet, closet, or mudroom installations.
• The 1-1/8 inch width keeps the footprint narrow, which allows multiple hooks to be lined up along rails, locker runs, or wall studs without crowding.
• The 5/8 inch center-to-center hole spacing defines a compact mounting pattern, which suits narrow rails or stiles and can align with existing small fastener patterns during replacement work.

Mounting Details For Accurate Hook Placement

The 5/8 inch center-to-center dimension on this Belwith Keeler double hook defines the distance between its mounting holes, so layout lines can be marked quickly for consistent placement across a run of cabinets or wall cleats. That compact spacing matches narrow stile and rail faces often found in closets and casework, so installers can position the hook without running into edge clearances or neighboring hardware. The 2-7/8 inch projection also factors into placement, because it sets how far garments or tools will stand off the panel, guiding installers on vertical height so hanging items clear base molding or benches. With a 1-1/8 inch width, the hook seats comfortably on slim surfaces, letting layout follow centerlines on face frames, gables, or partitions for a balanced appearance.

Using This White Zinc Double Hook In Projects

Where This Belwith Keeler Utility Hook Fits Best

This Belwith Keeler Utility Hooks Series double coat hook works well anywhere a compact, visible hanging point is needed on finished woodwork. The decorative hooks category and white finish make it suited to closets, cabinet ends, mudroom panels, or painted utility rooms where hardware is part of the finished look. A 3-1/2 inch length lets each arm extend enough to hold coats, aprons, or bags in residential or shop spaces without needing a deep panel. The 2-7/8 inch projection keeps hanging items slightly out from vertical surfaces, helping garments dry and keeping straps reachable when mounted along workstations or locker rows. Its 1-1/8 inch width and 5/8 inch center-to-center pattern allow multiple hooks to be spaced along narrow rails, so long runs of storage can be built on modest-width boards or cabinet interiors.

Why These Dimensions Support Repeatable Installation

The defined 5/8 inch center-to-center mounting distance gives a fixed reference point for jigs or templates, so installers can drill consistent mounting points when repeating this hook across a project. That small pattern suits narrow face frames or closet partitions, which helps maintain edge distances and reduces the chance of crowding neighboring hardware. The 3-1/2 inch length provides a known overall size, so layout drawings or cut sheets can call out clearances between hooks and adjacent components like shelves or vertical dividers. With a 2-7/8 inch projection, installers know how far hanging items will stand off the surface, supporting predictable spacing above benches, countertops, or base cabinets. The zinc material paired with the white finish creates a stable, uniform surface, which keeps the appearance consistent from hook to hook on large installations such as multi-bay closet systems.

Common Questions About This Double Coat Hook

Select This Hook For Compact, Visible Hanging Points

This Belwith Keeler DBL COAT HOOK 5/8 C/C white finish piece combines a zinc body, double hook layout, and compact 3-1/2 inch by 1-1/8 inch footprint to create efficient hanging in tight spaces. The 2-7/8 inch projection and 5/8 inch center-to-center format support repeatable mounting on face frames, rails, and closet panels. For projects needing neat, white decorative hooks that pull daily duty on cabinets, closets, or wall boards, this double coat hook offers defined dimensions and a straightforward geometry that fit easily into shop drawings and on-site layouts.