Screwdriver Assortment 8 Pieces brings together slotted and Phillips drivers in one organized set, so installers and shop crews have common screw profiles ready at hand for cabinet, hardware, and general woodworking fasteners on routine jobs.
The set provides four slotted screwdrivers in 0.6 x 3.5 mm, 0.8 x 4.5 mm, 1.2 x 7.0 mm, and 1.6 x 9.0 mm sizes, covering a range of slot widths and blade thicknesses that match typical small hardware screws through larger woodworking screws, reducing time spent searching for a workable fit.
Two standard Phillips screwdrivers in PH1 and PH2 sizes give coverage for frequent cross-head screws found in many woodworking and cabinet hardware applications, which helps keep driving torque under control and limits cam-out when the bit matches the screw head.
The set also adds Short PH1 and Short PH2 drivers, so the same familiar tip sizes are available in a shorter format for working near cabinet backs, inside carcase corners, or around installed hardware where a full-length handle would interfere with adjacent components.
All pieces are part of the Wurth Zebra brand hand tools line, combining these common screwdriver sizes into a consistently identified group that stays together on the bench or cart and helps crews return the same tools to the same location between tasks.
A foam drawer insert holds the eight screwdrivers in fixed positions, which keeps the exact size visible at a glance in tool drawers or workstations and speeds up selection when moving quickly between fasteners of different head styles and dimensions.
The four slotted sizes from 0.6 x 3.5 mm through 1.6 x 9.0 mm give users several blade widths and thicknesses to align with slot dimensions, which supports better torque transfer into the fastener and helps the blade stay seated during steady manual turning.
PH1 and PH2 Phillips screwdrivers cover the cross-head sizes commonly found on many woodworking screws, meaning the point can sit fully into the recess so drive force goes straight down the axis of the screw, limiting head damage under normal hand-tool use.
The Short PH1 and Short PH2 provide the same Phillips fit where the handle length or shaft of a standard driver would strike cabinet sides or nearby components, enabling work in tight compartments while still using a familiar size marking for the screw head match.
The foam drawer insert keeps each screwdriver in an assigned place in a drawer layout, so when a particular slotted width or Phillips size is needed, the user can read the description once, remember its position, and return to that spot repeatedly without searching.
Working from this organized layout, installers can move from pre-assembly on the bench to adjustment at the job site by transferring the foam insert into a compatible drawer system or tool storage, keeping the same arrangement and supporting repeatable workflows.
The Screwdriver Assortment 8 Pieces belongs to the Woodworking Tools and Equipment, Hand Tools, Screwdrivers category, so it sits naturally in shops and job setups focused on cabinetry, furniture, and related wood-based assemblies that rely on manual screw driving.
The four slotted screwdrivers with one-piece hexagon blade in 0.6 x 3.5 mm, 0.8 x 4.5 mm, 1.2 x 7.0 mm, and 1.6 x 9.0 mm sizes fit into tasks where installers encounter flat-slot screws across different thicknesses, such as small hardware, brackets, or structural screws requiring controlled manual torque.
The two Phillips screwdrivers in PH1 and PH2 support work on fasteners with matching cross-head patterns, which appear frequently in woodworking shop hardware, giving technicians tools that align with screw recess geometry on drawer runners, hinges, or similar fittings.
The Short PH1 and Short PH2 extend that coverage into tight locations, so the same familiar PH1 and PH2 markings guide selection whether the work is out in the open or tucked against cabinet walls or inside confined furniture spaces.
The Wurth 965900501 identifier ties the entire eight-piece group to a single manufacturer part number, which helps purchasing teams reorder the same set and lets supervisors specify this exact combination of sizes when setting up new workstations.
Being part of Zebra brand hand tools places this assortment within Wurth Baer Supply offerings intended for woodworking professionals, aligning the screwdriver selection with other tools sourced from the same distribution channel for shop-standardized equipment.
The one-piece hexagon blade design on the slotted screwdrivers creates a continuous shaft profile from tip toward handle, giving a solid interface for manipulating the driver during higher-torque operations common in woodworking and helping maintain a direct feel of screw resistance.
Having all four slotted sizes in the same set means users can move up or down in width and thickness as needed for a given screw, which better matches the blade to the slot so torque is shared across more surface and reduces the chance of the tip twisting out while turning.
Standard PH1 and PH2 Phillips drivers concentrate on the widely used cross-head screw sizes, so technicians can rely on a small number of marked tools to handle different stations, limiting the variety of separate drivers that need to stay on a bench or cart.
The Short PH1 and Short PH2 drivers allow the same bit profile to work where depth is restricted, keeping consistency in how fasteners are engaged in both open and obstructed positions and avoiding improvised angles with longer drivers in cramped spaces.
The foam drawer insert arranges the eight drivers so that each type and size remains in a repeatable location, which supports lean-style organization where the absence of a tool is visible immediately and retrieval time between fasteners is reduced.
Identifying the set as Wurth 965900501 with Zebra branding means users can specify this exact eight-piece configuration for multiple benches or trucks, so crews across different jobs work with the same screwdriver assortment layout and markings, simplifying training and tool handoff.
The Screwdriver Assortment 8 Pieces covers slotted screws with four blade sizes and Phillips screws in PH1 and PH2, so one set serves both flat-slot and common cross-head fasteners in woodworking tasks.
The four slotted sizes from 0.6 x 3.5 mm to 1.6 x 9.0 mm let users match blade width and thickness to various screw slots, improving grip in the recess and supporting controlled torque during fastening work.
The Short PH1 and Short PH2 drivers are used where space is tight, such as inside cabinets or near adjacent panels, letting installers use standard Phillips sizes without interference from a long shaft or handle.
The foam drawer insert holds each screwdriver in a fixed position, creating an organized layout that speeds size identification, keeps the eight pieces together, and highlights any missing driver during daily shop use.
The Wurth 965900501 part number ties the entire eight-piece Zebra screwdriver assortment to one identifier, so purchasing teams can order or restock the same configuration consistently for multiple work areas.
The Zebra brand hand tools label identifies this assortment as part of Wurth Zebra tools, helping shops align screwdriver choices with other Zebra products and rely on the stated Limited Lifetime Warranty for the hand tools line.
The Screwdriver Assortment 8 Pieces from Wurth brings four slotted sizes, PH1 and PH2, plus Short PH1 and Short PH2 into one clearly laid-out group, so shops gain a ready set of everyday drivers matched to typical woodworking fasteners.
With the foam drawer insert organizing each Wurth 965900501 Zebra tool and the range of blade dimensions spanning common slot and Phillips heads, this set supports repeatable setups across benches or trucks.
Order Screwdriver Assortment 8 Pieces through Wurth Baer Supply to align slotted and Phillips driving tasks with a single, consistently organized screwdriver configuration.