20V MAX Cordless Drill/Impact Driver Combo Kit pairs a 1/2 inch two speed drill/driver with a 1/4 inch impact driver so installers can handle drilling and driving tasks on the same cordless system. The 1/2 inch two speed drill/driver uses a high performance motor delivering 283 Units Watts Out and 0-350/0-1,500 RPM, giving controlled speed ranges for boring holes or driving fasteners in typical woodworking jobs. Its compact 8.25 inch length and 3.5 lb weight reduce hand strain during overhead work or when working inside cabinets. The drill/driver also has an ergonomic handle design, which helps maintain a steady grip during repetitive drilling. An LED light on the drill/driver illuminates the work area when working in dim shop corners. Integrated bit storage keeps commonly used bits on the tool, saving trips back to the bench between operations.
The combo kit uses 20V MAX 1.3 Ah lithium ion batteries, so both tools run on the same cordless power source for streamlined tool changes. These professional grade batteries deliver more runtime than traditional Ni br Cd batteries, which supports longer work periods between battery swaps on installation days. The batteries are lighter weight than traditional Ni br Cd batteries, reducing overall tool weight in the hand. That lower weight paired with compact tool design helps reduce user fatigue across a full shift. Using a common 20V MAX platform also simplifies charging routines in the shop or on site.
The 1/2 inch drill/driver at 8.25 inches long fits more easily inside base cabinets or under countertops, so installers can drill mounting or pilot holes close to walls. Its 3.5 lb weight helps when drilling multiple hinge or hardware holes overhead, since the user is not holding excessive mass away from the body. The LED light on the drill/driver shines on the bit area, which is useful when working inside dark cabinet boxes or storage units. Drill/driver bit storage keeps a pilot bit or driver bit at hand, supporting quick shifts between drilling and fastening steps on the same run of cabinets or fixtures. The 1/4 inch impact driver length of 6.9 inches allows access between cleats, brackets, or drawer slides, giving better reach for fasteners located near corners. At 3.3 lb, the impact driver is suited to long screw driving runs in shop assembly lines, since the lighter tool is easier to maneuver.
The drill/driver two speed range of 0-350/0-1,500 RPM lets users match low speed for controlled hole starting and higher speed for faster drilling through typical woodworking materials. Its 283 Units Watts Out rating reflects power available for general fastening tasks, supporting consistent performance when switching between materials during a project. The impact driver torque of 1450 inch/lb helps drive screws into denser stock without frequent stalling, which reduces time spent backing out and restarting fasteners. With 0-2,800 RPM and 0-3,100 BPM, the impact driver maintains driving speed on repetitive screws, limiting delays on larger installations. The quick load chuck supports one handed bit swaps, so users can change between Phillips and other driver bits without setting the tool down, which helps when working from ladders or confined platforms. Professional grade 20V MAX 1.3 Ah lithium ion batteries deliver more runtime than traditional Ni br Cd batteries, supporting longer continuous tool use during layout, predrilling, and fastening stages. Their lighter weight than traditional Ni br Cd batteries contributes to total tool balance, which aids in precise bit placement and reduces wrist strain throughout repeated use.
The 20V MAX Cordless Drill/Impact Driver Combo Kit includes one PCC601 1/2 inch drill/driver and one PCC641 1/4 inch impact driver, so users gain both drilling and impact driving capability on the same 20V MAX platform.
The 1/2 inch two speed drill/driver delivers 283 Units Watts Out and 0-350/0-1,500 RPM, allowing controlled hole drilling and screw driving across typical woodworking and installation materials.
The 1/4 inch impact driver provides 1450 inch/lb of torque, 0-2,800 RPM, and 0-3,100 BPM, which suits repetitive screw driving and fastening into wood where higher torque and speed improve productivity.
The impact driver length of 6.9 inches and weight of 3.3 lb allow access inside cabinets or tight framing spaces, helping users position fasteners accurately without awkward tool angles.
The 20V MAX 1.3 Ah lithium ion batteries deliver more runtime and are lighter weight than traditional Ni br Cd batteries, supporting longer work periods with less hand fatigue.
Both the drill/driver and impact driver feature LED lights that illuminate the immediate work area, which improves bit alignment and screw placement in dim or enclosed spaces.
The 20V MAX Cordless Drill/Impact Driver Combo Kit from Porter Cable Corporation provides a PCC601 1/2 inch two speed drill/driver and a PCC641 1/4 inch impact driver on a shared 20V MAX lithium ion platform. With compact tool dimensions, ergonomic handles, LED lights, and onboard bit storage, the kit supports drilling and fastening in cabinets, shop fixtures, and general woodworking. Professional grade 20V MAX 1.3 Ah lithium ion batteries deliver more runtime and lighter weight than traditional Ni br Cd batteries, which benefits longer installation sessions. For buyers needing a practical cordless setup for drilling and impact driving in one part number, PCCK604L2 aligns tool performance, weight, and runtime for everyday woodworking and installation work.