Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf trash pullout gives a kitchen cabinet a concealed waste storage setup with two 50 quart champagne bins and a bottom mount frame. This bottom mount trash pullout is made by Rev-A-Shelf Corporation and uses undermount full-extension progressive roller slides with soft-close. The frame has a champagne powder coat finish and includes door mounting brackets for a door mount trash pullout installation approach when the cabinet setup allows it. As a cabinet waste pullout, it is built for buyers who want full access to both bins while keeping trash or recycling behind a cabinet door. The frame also accepts 35 quart or 50 quart trash bins, which helps when matching an existing kitchen cabinet trash pullout layout or planning a future bin change.
Key specs to confirm: This Rev-A-Shelf bottom mount trash pullout is listed as a 14-3/4 inch champagne unit with two 50 quart bins. Buyers should confirm cabinet opening width, interior depth, interior height, and door clearance before ordering. Because this is a bottom mount unit with undermount full-extension slides and door mounting brackets, cabinet floor condition and door attachment alignment also matter. The frame is verified to accept 35 quart or 50 quart bins, so confirm which bin size your project requires. The slide system is verified as 90 lb rated. Any additional dimensional tolerances, safety details, or compliance information not shown here should be confirmed with the manufacturer or technical documentation.
What's included: Champagne powder coat frame, two 50 quart champagne bins, undermount full-extension progressive roller slides with soft-close, and door mounting brackets. Lids are sold separately.
What to verify before ordering: Confirm your cabinet can accept a 14-3/4 inch class pullout, the bottom panel can support a bottom mount installation, the door can be attached with the included brackets, and your opening allows full pullout travel without hinge or adjacent cabinet interference.
A double trash pullout is often chosen when a kitchen needs one concealed location for both trash and recycling. In that setup, two 50 quart bins give the user separate capacity without adding another cabinet accessory elsewhere in the room. This Rev-A-Shelf trash pullout fits that use case by combining a bottom mount frame, full-extension access, and soft-close travel in one cabinet waste pullout assembly.
For installers, the practical value starts with access and mounting style. A bottom mount trash pullout sits on the cabinet floor area rather than relying on side-mount hardware. That can be useful when planning around cabinet wall obstructions or when matching a cabinet layout already prepared for a floor-mounted accessory. The included door mounting brackets also matter in daily use because many buyers want the cabinet door to move with the pullout rather than opening the door and then reaching for an inner frame.
For remodel work, this undermount trash pullout can help clean up a kitchen traffic path by moving waste storage off the floor and into a dedicated cabinet bay. The full-extension progressive roller slides are verified, which means the bins move out so the user can reach contents more easily. Soft-close operation helps in busy family kitchens, shared work areas, or any cabinet that gets frequent use throughout the day.
If the project involves replacing an older kitchen cabinet trash pullout, buyers should confirm more than just nominal width. Check the opening width, cabinet depth, cabinet height, hinge clearance, and where the door mounting brackets will land on the back of the cabinet door. If lids are needed for odor control or sorting, note that lids are sold separately. If a buyer is considering a different internal bin size later, the verified frame accepts 35 quart or 50 quart trash bins, which may help with future layout changes, but exact fit details should still be confirmed against current technical information.
When comparing a cabinet waste pullout, buyers usually focus on mounting style, number of bins, slide travel, closing action, and whether door mounting hardware is included. This Rev-A-Shelf waste container assembly gives clear verified answers on those points. It is a bottom mount trash pullout, it includes two 50 quart champagne bins, it uses undermount full-extension progressive roller slides, and it includes soft-close and door mounting brackets.
That combination can make product selection easier because the key operating parts are defined up front. Some buyers prefer a pullout that already includes the bins and the door brackets so they do not have to piece together multiple items for a standard install. Others need a frame that can work with more than one verified bin size. Here, the frame is stated to accept 35 quart or 50 quart trash bins, which gives useful flexibility within the series.
The champagne powder coat frame is also a practical detail, especially for projects where visible hardware finish matters when the unit is opened. Since lids are sold separately, buyers can decide whether they need them based on the application rather than paying for a part they may not use. For a consistent order, confirm the desired lid color and size separately.
As with any door mount trash pullout, reliability in the field depends on matching the product to the cabinet. Confirm the cabinet opening, the mounting surface, the door style, and any nearby hinge or drawer conditions before ordering. Following manufacturer installation guidance and local building requirements where applicable will help avoid fit issues during install.
This Rev-A-Shelf trash pullout includes two 50 quart champagne bins.
This bottom mount trash pullout is listed in the bottom mount trash pullouts class and is designed for cabinet floor mounting.
This cabinet waste pullout uses undermount full-extension progressive roller slides with soft-close.
This Rev-A-Shelf waste pullout includes door mounting brackets, so buyers can plan for a door-mounted installation where the cabinet allows it.
This kitchen cabinet trash pullout requires buyers to confirm opening width, depth, height, and door clearance against the product documentation.
This double trash pullout does not include lids. Lids are sold separately.
This Rev-A-Shelf frame is verified to accept 35 quart or 50 quart trash bins.
This undermount trash pullout uses slides that are listed as 90 lb rated.
This bottom mount waste pullout requires confirmation of cabinet floor mounting space, full slide travel, door bracket placement, and hinge clearance. Follow manufacturer installation guidance and local building requirements where applicable.
Soft close waste pullout selection is easier when the core details are clear: this Rev-A-Shelf unit is a bottom mount frame with two 50 quart champagne bins, undermount full-extension progressive roller slides, soft-close, and included door mounting brackets. Before purchase, confirm cabinet opening size, interior clearance, and whether your door and cabinet floor are ready for this installation style. If your project needs lids or a different bin setup, verify those items separately so the pullout matches the cabinet on the first order.
Sold In: 1 Set