Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
LC-104 Right-Hand 1" Lockbar Clip is a CompX Timberline Lock component designed for drawer lock system layouts that use gang lock cylinder bodies, so it supports multi-drawer locking with a single key point. This clip is identified by manufacturer part number LC-104, which helps match it to drawings or existing hardware when servicing a current installation or planning a new bank of drawers. The SAP description "LOCK CLIP, 1" LEG, FRONT RH MOUNT, 32MM" describes a 1 inch leg size, a front right-hand mounting orientation, and a 32mm reference, so installers can plan hole locations, lockbar geometry, and cabinet boring patterns around a known dimension. As part of the CompX Timberline Lock family in the drawer lock system class, this clip fits into organized parts lists, helping shops standardize on a consistent gang lock approach across similar projects.
The LC-104 Right-Hand 1" Lockbar Clip is described as a front right-hand mount component, so it is used where the lockbar needs to be captured on the front right side of a drawer lock system run. The 1 inch leg dimension helps define how far the clip projects from its mounting point, which influences where the lockbar sits relative to the cabinet structure and drawer members during layout. The 32mm reference ties the clip to a specific measurement context, so designers can coordinate drilling or machining patterns around that spacing when pairing LC-104 with gang lock cylinder bodies. Because this part is within the drawer lock system product class, it fits into assemblies where multiple drawers are controlled by one lock, supporting organized hardware selection for those installations.
The LC-104 Right-Hand 1" Lockbar Clip is described as an extended lockbar component for use with ganglock cylinder bodies, so it works in drawer lock system runs where a central cylinder drives a bar to secure several drawers. Being part of the locks and latches category under gang locks and cylinder bodies places LC-104 in assemblies that rely on a shared lockbar rather than individual drawer locks, which can simplify key control across a bank of drawers. The front right-hand mounting orientation lets planners specify LC-104 for the right side of a front-mounted bar path, separating it from left-hand or rear-mount options and reducing mix-ups when parts are pulled for a job. The 1 inch leg, called out in the SAP description, defines the length of the projecting leg that interacts with the bar or cabinet structure, affecting how the bar aligns with drawer members in use.
The LC-104 clip carries a 32mm reference in its description, giving a clear numeric value that can be tied into layout drawings or system patterns when planning gang lock installations. When a shop repeats casework using 32mm-based spacing, matching that dimension in the lock clip helps keep boring and machining steps consistent from project to project. The defined 1 inch leg dimension supports predictable stand-off distance for the lockbar, which helps reduce rework when duplicating drawer banks that share the same gang lock cylinder bodies. Because LC-104 is a named CompX Timberline Lock part with manufacturer number LC-104, it can be specified directly on cut lists and hardware schedules, so replacements or additions can be ordered again without remeasuring the existing layout.
The LC-104 Right-Hand 1" Lockbar Clip is described for use with ganglock cylinder bodies in a drawer lock system, so it serves in multi-drawer locking layouts using a shared bar.
The LC-104 Right-Hand 1" Lockbar Clip is specified as a front right-hand mount, meaning it is positioned on the front right side of the lockbar run, guiding where it is placed in the cabinet.
The LC-104 lock clip has a 1 inch leg, which defines how far the clip extends from its mounting point and influences lockbar location relative to the drawers.
The LC-104 Right-Hand 1" Lockbar Clip includes a 32mm reference, which ties it to a specific measurement framework useful when aligning with system boring or layout grids.
The LC-104 Right-Hand 1" Lockbar Clip carries manufacturer part number LC-104 and a SAP description, allowing it to be clearly specified on drawings, schedules, and purchase lists.
The LC-104 lock clip is in the locks and latches category under gang locks and cylinder bodies, marking it as a drawer lock system component tied to gang lock layouts.
The LC-104 Right-Hand 1" Lockbar Clip from CompX Timberline Lock gives installers a defined drawer lock system component with a 1 inch leg, front right-hand mounting, and a 32mm reference, so it fits planned layouts around ganglock cylinder bodies. Using a clearly identified part number LC-104 within the locks and latches, gang locks, cylinder bodies category supports repeatable hardware choices across projects. For drawer banks that rely on a shared bar and cylinder, selecting LC-104 aligns the lockbar position and orientation with the intended design, helping keep multi-drawer locking consistent from job to job.
Sold In: 1 Each