
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Edgebanding 1060A White High Gloss is a PVC edge banding from 3B S.p.A designed to finish exposed panel edges with a consistent white high gloss surface. The 1mm thickness gives the edge enough body for a solid-looking profile, which helps panels read as finished parts rather than raw board. The 23mm width suits common panel thicknesses where a small amount of overhang is trimmed flush, supporting a straight, even line along cabinet sides or shelves. The white high gloss finish provides a bright, reflective appearance that visually matches high gloss white surfaces, helping doors, drawer fronts, or casework present as one continuous finish. Supplied on a 150lm roll, the material supports longer production runs or multiple cabinets from a single stock length, which streamlines cutting, feeding, and changeover during shop or jobsite work.
This edge banding is 1mm thick and 23mm wide, so it suits applications where a slightly heavier edge is preferred for visual depth and durability at cabinet fronts. The 23mm width allows installers to run the material slightly proud of the panel, then trim it back for a clean, straight edge. As a PVC product in the Edgebanding & Surfacing category, it integrates into workflows that use standard edgebanding machinery or hand tools suited to PVC, supporting consistent results on cabinet parts, shelving, and other panel-based components.
This 3B S.p.A edge banding fits work where panels need a finished white high gloss edge to match or complement glossy white surfaces. The 1mm thickness suits cabinet doors, drawer fronts, sides, and shelves where a noticeable but not bulky edge is preferred. In shop environments producing multiple similar components, the 150lm roll length supports repeated cuts from one stock source, which helps keep edge color and sheen consistent across a full run of parts. On individual builds, the same roll can service several cabinets, so edges across upper and lower units share the same 1060A white high gloss tone. As part of the Edgebanding, PVC product class, it works in setups already tuned for PVC material, helping maintain predictable trimming and scraping behavior along straight runs and shorter parts.
The combination of 1mm thickness and PVC construction gives the edge a defined profile that responds predictably to trimming tools, which helps maintain straight lines and crisp corners on finished cabinets. The 23mm width offers enough coverage for typical panel thickness ranges while still leaving manageable overhang, so final passes can focus on refining the edge rather than fighting excess material. The white high gloss finish ties the edge visually to high gloss white faces, which reduces distractions at door and drawer gaps where edges are in direct view. The 150lm roll format supports longer continuous runs along tall panels or multiple pieces, which reduces breaks in color and gloss level at joints and helps projects that rely on uniform appearance across a bank of cabinets or casework.
Edgebanding 1060A White High Gloss is classified as PVC edge banding, so it fits workflows and tooling commonly used for PVC edgebanding in cabinet and panel processing.
The 1mm thickness creates a solid-looking edge, while the 23mm width gives coverage with trim allowance, helping produce flush, straight cabinet and shelving edges after trimming.
The white high gloss finish delivers a bright, reflective edge that visually aligns with high gloss white faces, supporting a unified appearance on doors, drawer fronts, and casework.
The 150lm roll length supplies continuous material for extended runs, which reduces splice points on long edges and supports repetitive cutting for multiple cabinet components.
The 733391059A manufacturer part number identifies this specific 1060A white high gloss 1mm x 23mm PVC edge banding, helping match future orders to the same material.
This product belongs to the Edgebanding & Surfacing category as PVC edge banding, aligning it with other surfacing materials used for finishing panel edges.
Choosing this Edgebanding 1060A White High Gloss 1mm Thick x 23mm Width from 3B S.p.A means working with a defined PVC edge banding size and finish tailored to white high gloss projects. The 1mm thickness, 23mm width, and white high gloss surface work together to create finished cabinet and panel edges that visually align with glossy white faces. With its 150lm roll length and clearly identified 733391059A part number, this edge banding supports both one-off builds and repeat shop runs where matching appearance and material from job to job is important.
Sold In: 150 m