Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Euro Metal Drawer System EuroBox describes a metal drawer system component designed as part of the Wurth PRO Euro Drawer System, so it serves as a core piece when building or replacing a Euro-style drawer in cabinetry. The part is identified as an 86x450mm drawer member left in white, which means this piece is sized for an 18 inch drawer length and set up specifically for the left side, helping installers match the correct side during layout. The product name specifies 3-3/8 inch height, so it suits drawer designs using that side height for consistent drawer box proportions. The brand Pro Value Series ties this member to the broader Pro Value Series PRO 2000 Drawer Systems category, which helps shops align this part with existing system components. The white finish provides a neutral, clean look that coordinates with many cabinet interiors in residential or commercial work.
This Wurth PRO Euro Drawer System member is described as 86x450mm and 18 inches by 3-3/8 inches, so its dimensions guide cabinetmakers when sizing drawer boxes and case openings to coordinate with the slide geometry. The part is specified as a drawer member left, which means it is intended for the left side of the drawer assembly, helping installers avoid side-to-side confusion when laying out pairs. The manufacturer part number F12E180-DL-E01A gives a precise identifier, which supports repeat ordering when matching existing installations or building out multiple similar cabinets. Being part of the Pro Value Series PRO 2000 Drawer Systems, this member is suited to projects already using that drawer system line, aiding consistency across a shop's installed work.
This 86x450mm drawer member in white is part of the Wurth PRO Euro Drawer System, so it fits projects built around that Euro-style metal drawer design in both new construction and retrofits using the same system. The 18 inch by 3-3/8 inch sizing makes it appropriate where that nominal drawer length and side height are already part of the cabinet plan, supporting consistent side heights from one drawer to the next. Because the part is specifically the drawer member left, it works on the left side of the drawer box within a pair, giving installers a clearly defined role for this component in the assembly. The Pro Value Series branding places it within the Pro Value Series PRO 2000 Drawer Systems category, so shops standardizing on that drawer family can integrate this member into their normal construction workflow.
The self-closing function in this metal drawer system assists drawers in reaching the fully closed position, which helps maintain a finished look across cabinet faces and reduces drawers sitting slightly ajar in everyday use. Double stop positions supply predictable points in the slide travel, which aids users by providing consistent open and closed behavior in repeated operation. The 2-dimensional front panel adjustment allows the installer to shift the drawer front in two directions, supporting tight reveals and straight sightlines across a run of drawers, which is important in higher-visibility cabinetry installations. Load ratings of 100 pounds static and 75 pounds dynamic give defined capacity figures, helping designers and builders match the system to typical contents such as cookware, utensils, or office supplies. The white finish provides a neutral appearance inside the cabinet, which fits many design schemes without drawing attention away from the cabinet fronts. Taken together, these details support a drawer build that aligns with the Wurth PRO Euro Drawer System performance and appearance targets.
This part is used with the Wurth PRO Euro Drawer System as a metal drawer system component within the Pro Value Series PRO 2000 Drawer Systems, so it suits projects built around that system line.
This member is specified as a drawer member left, meaning it is intended for installation on the left side of the drawer assembly within the overall system layout.
The drawer member is described as 86x450mm and 18 inches by 3-3/8 inches, so it is suited to drawer designs planned around that length and side height within the cabinet.
The self-closing metal drawer system pulls the drawer shut near the end of travel, which supports fully closed positions and reduces partially open drawers in regular cabinet use.
These ratings indicate the drawer system is designed for up to 100 pounds under static conditions and 75 pounds during motion, guiding how heavily the drawer can be loaded in service.
The 2-dimensional front panel adjustment allows the drawer front to shift in two directions, helping installers fine-tune gaps and alignment across multiple drawers in a cabinet run.
This Pro Euro Metal Drawer System EuroBox member is defined as an 86x450mm, 18 inch by 3-3/8 inch drawer member left in white within the Pro Value Series PRO 2000 Drawer Systems, so it fits work that follows those system dimensions and style. With self-closing action, double stop positions, and 2-dimensional front panel adjustment, it offers practical features that support predictable drawer movement and clean alignment. The 100 pound static and 75 pound dynamic load ratings give clear capacity guidance for typical cabinet contents. When a project calls for a left-side metal drawer system component matching the Wurth PRO Euro Drawer System, this part number F12E180-DL-E01A provides a defined option to match that specification.
Sold In: 20 Each