Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Euro EuroBox right-hand drawer member is the cabinet-side component of the Pro Value Series metal drawer system, sized at 18 inches long with a 3-3/8 inch profile height in White. It is the structural side rail that anchors the drawer runner inside the cabinet and carries the drawer box load on its right side.
This drawer member mounts inside the cabinet box on the right side, providing the rail the drawer box runs on. In a typical EuroBox installation, the cabinet member is fixed to the cabinet side wall and the drawer member attaches to the drawer box itself — together they create the running pair. Because the system is handed, the right-hand member belongs on the right side of the cabinet as viewed from the front. Using two right-hand members in one drawer position will not produce a working pair; one left and one right are required. If you are building a full bank of drawers, count one right-hand member and one left-hand member per drawer opening.
The White finish on this member is a practical choice for cabinet shops building frameless boxes with white melamine interiors, or for any painted cabinet where exposed hardware needs to recede visually. White coordinates with thermofoil fronts, painted MDF boxes, and white-laminate cabinet carcasses without requiring additional masking or finishing. The metal profile construction gives the system structural rigidity that a wood drawer side of comparable height cannot match at this profile thickness.
Cabinet shops building production runs of white-interior frameless cabinets reach for this member when they want a metal drawer system at an accessible price point. The 100 lb capacity puts it well above what most kitchen and bath drawers carry, so it handles pots, pantry stock, and file storage without issue. Designers specifying handle-less or minimalist kitchens appreciate the clean White surface that keeps the hardware from competing with the door and drawer fronts. Contractors replacing a single worn-out member on an existing EuroBox installation can source this right-hand piece individually rather than replacing the full system.
This is one component — the right-hand cabinet member. A working drawer requires the matching left-hand cabinet member and the appropriate drawer box members. Order all the pieces the system specifies to complete one drawer position.
No. EuroBox components are engineered for the Pro Euro metal drawer system. Locking devices, drawer members, and accessories from other brands or series are not interchangeable with this system.
White is a close visual match for most white melamine and white thermofoil interiors, though exact shade can vary by panel manufacturer. The member sits along the cabinet side wall where it is largely obscured by the drawer box in use.
The 18 inch nominal length is sized for standard kitchen and bath cabinet depths. Check the Pro Euro EuroBox system specification for the required cabinet depth and cutting dimensions before ordering.
Pairing the correct right-hand member with its left-hand counterpart gives the EuroBox drawer a solid, matched foundation — and in White, that foundation stays invisible inside the cabinet so the fronts and hardware do the talking.
Sold In: 20 Each