Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt GSlide KVGS-2070B 9 is a 9-inch undermount drawer slide with integrated soft-close and full-extension travel, built for small drawers in both face-frame and frameless cabinets. Roller bearings carry the load quietly, and the zinc steel construction keeps the hardware out of sight beneath the drawer box.
Nine inches is a short run, and that is exactly the point. Small utility drawers — spice pullouts, tray inserts, narrow vanity drawers, and shallow desktop organizer boxes — need a slide sized to the box, not one trimmed down from a longer length. At full extension, the entire drawer box clears the cabinet opening, so the contents at the back are just as reachable as those in front. The soft-close mechanism means even a lightly loaded small drawer settles shut quietly instead of rattling to a stop.
The slide body is steel with a zinc finish, a practical choice for an undermount application where the hardware stays hidden beneath the drawer box. Roller bearings carry the drawer through its travel smoothly and without the noise profile of a dry plastic track. Zinc provides the corrosion resistance expected of an indoor cabinet installation, and the understated finish does not compete with the cabinetry it serves. This slide is an indoor product; it is not rated for exterior or high-moisture environments.
This slide accommodates drawer side thicknesses from 1/2 inch to 5/8 inch — the thinner end of the undermount range, which suits small drawer boxes often built from 1/2-inch plywood or similar sheet goods. The drawer box must be built to the GSlide specification for this nominal length, including the correct box width, rear notch, and any required locking-device drilling. Because the slide works in both face-frame and frameless cabinets, it fits a wide range of shop situations without needing a dedicated variant for each construction type. Cabinet shops building small accessory drawers and homeowners fitting a bathroom vanity pullout are equally well served.
Confirm the sold-as unit at checkout; undermount slides in this series are typically sold per pair, but verify the quantity shown on the product listing before ordering.
Yes. The slide accommodates drawer side thicknesses from 1/2 inch up to 5/8 inch, so half-inch plywood sides fall within the supported range.
Face-frame cabinets typically need rear mounting brackets or sockets to support the back of the slide where the cabinet side is set back from the face frame. Check the GSlide installation documentation for the correct bracket for this series, as brackets are series-specific and sold separately.
No. Undermount slides require the drawer box to be built to the manufacturer's specification for this nominal length, including the correct width formula, rear notch, and locking-device drilling. An off-spec box will not seat correctly on the runners.
Full extension means the drawer member travels approximately the full slide length, bringing the back of the drawer box out to the cabinet face. On a 9-inch slide, the entire shallow drawer clears the cabinet opening so nothing is blocked from view or reach.
Short runs deserve the same smooth, controlled close as any full-depth drawer. The GSlide KVGS-2070B 9 brings soft-close full extension to the 9-inch applications that standard-length slides cannot serve cleanly.
Sold In: 1 Set
