Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
9 oz Adhesive Cartridge Mix Tip identifies this as a dedicated tip for 9 oz, or 250ml, adhesive cartridges, so it matches that cartridge size when dispensing material on solid surface or similar work. The 10:1 Ratio Tip detail means it is designed for cartridges that dispense adhesive components in a 10-to-1 mix, so the components are delivered in the correct proportion for the intended system. The 909 Surfaces brand and 909 Surfaces Solid Surface product class show it is built for solid surface adhesive work, keeping the focus on countertop, panel, or seam bonding tasks. The Manufacturer Part # PCC201 provides a precise identifier, helping match this tip to existing shop lists or previous orders. The Each sales unit means it is supplied one at a time, so quantities can be matched directly to the number of 9 oz cartridges planned for a job.
The Web Description lists this as a 10:1 Ratio Tip for a 9 oz (250ml) Adhesive Cartridge, so it is intended to attach to cartridges of that size using a 10-to-1 system in typical glue applicator setups. The 1/2"W x 7-1/4"L dimensions indicate a relatively narrow but extended tip, shaping how the adhesive exits the cartridge and reaches into seams during application. Being in the Glue Applicators category confirms its role at the end of an adhesive cartridge, where the installer controls placement along joints or edges. The single-unit Each sales approach lets shops stock the number of tips that tracks with their specific workflow, whether that is occasional repairs or steady solid surface fabrication runs.
The SAP Description, TIP FOR 9 OZ (250ML) ADHESIVE CARTRIDGE, states that this PCC201 tip is intended for 9 oz, or 250ml, adhesive cartridges, so it aligns with that cartridge body size in a typical glue applicator. Being a 10:1 Ratio Tip, as described in the Web Description, connects it directly to 10-to-1 ratio adhesive systems, so it is aimed at cartridges that meter those proportions. The 909 Surfaces brand and 909 Surfaces Solid Surface product class collectively indicate that this tip sits naturally in solid surface shops working with adhesive cartridges for seams and bonding. The presence in the Edgebanding & Surfacing and Glue Applicators categories further ties it to surfacing, edging, and panel work where controlled adhesive flow through a cartridge tip is part of the normal workflow.
The 1/2"W dimension in the Web Description defines the width of the 9 oz Adhesive Cartridge Mix Tip, so it influences the size and profile of the adhesive bead as material exits the cartridge. This helps installers anticipate how the adhesive will cover a seam or joint in one pass. The 7-1/4"L length gives a relatively long tip body, offering reach from the cartridge nose into harder-to-access seams or behind edges in surfacing work. The 10:1 Ratio Tip specification means it is intended for 10-to-1 cartridge systems, so flow through the tip matches that adhesive format when paired with the correct cartridge. The PCC201 part number ties all of these attributes to a single, repeatable reference that shops can use when specifying mix tips for consistent results on recurring solid surface adhesive tasks.
The PCC201 9 oz Adhesive Cartridge Mix Tip is described as a tip for 9 oz, or 250ml, adhesive cartridges, so it matches that cartridge size in solid surface adhesive work.
The PCC201 tip is identified as a 10:1 Ratio Tip, so it is intended for adhesive cartridges that dispense components in a 10-to-1 proportion during application.
The Web Description lists the PCC201 tip at 1/2 inch wide by 7-1/4 inch long, so users can gauge reach and bead size in relation to their joints or seams.
The product is classified under 909 Surfaces Solid Surface and Glue Applicators, so it is positioned for solid surface adhesive and surfacing-related applications.
The Web Description notes that the 10:1 Ratio Tip is sold in an Each unit, so quantities correspond directly to the number of individual tips ordered.
The PCC201 manufacturer part number uniquely identifies this 9 oz Adhesive Cartridge Mix Tip, helping shops reorder the same tip style for consistent adhesive application.
The 9 oz Adhesive Cartridge Mix Tip from 909 Surfaces, identified as PCC201, is defined for 9 oz (250ml) adhesive cartridges using a 10:1 Ratio Tip format, so it aligns with that specific adhesive system layout. Its 1/2"W x 7-1/4"L sizing shapes how adhesive travels from the cartridge to the work surface, supporting predictable bead placement along seams. With its 909 Surfaces Solid Surface classification and Glue Applicators category placement at Wurth Baer Supply, this tip fits directly into solid surface and surfacing work that depends on cartridge-based adhesive delivery.
Sold In: 1 Each