Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Nevamar S6024T edge banding identifies this product as a dedicated edge treatment matched to the Nevamar S6024T surface design, which supports visually consistent panel work on cabinets and case goods. The 15/16 x .018 Nevamar S6024T, Frama-Tech FM15/16X018-S6024T size designation ties the edging directly to typical panel thicknesses where a 15/16 inch edging is used to cover the core and laminate edge in one pass. The .018 thickness detail indicates a thin PVC edge banding profile that works well in applications prioritizing a low-profile edge without excess bulk. The Nevamar S6024T reference in both the SAP description and web description signals that this edge banding is specified around that exact Nevamar pattern, which simplifies matching decisions during layout and cutting. The Framatech brand and 15/16X018-S6024T manufacturer part number give installers and shops a clear reference for reordering and job documentation.
The stated 15/16 inch width on the 15/16 x .018 Nevamar S6024T, Frama-Tech FM15/16X018-S6024T edge banding gives installers enough overhang to align the Nevamar S6024T edging on typical casework while still trimming back to a flush edge profile. The .018 thickness called out in the product name defines a lean PVC edge layer that sits close to the laminate plane, which affects how aggressively edges are trimmed and scraped on manual or automatic equipment. The PVC classification in the Edgebanding & Surfacing|Edgebanding, PVC category indicates compatibility with standard PVC edge banding set-ups, allowing shops to draw from established temperature and feed-rate practices when running this Nevamar S6024T material. The Nevamar S6024T pattern reference anchors fit decisions to that specific design match across exposed edges.
The product name 15/16 x .018 Nevamar S6024T and the category Edgebanding & Surfacing|Edgebanding, PVC position this Framatech edge banding as a PVC edging solution for panel-based construction where a Nevamar S6024T surface is specified. The 15/16 inch width works along exposed vertical and horizontal panel edges on cabinets, casework, and similar assemblies that use laminate or surfacing materials tied to the Nevamar S6024T design. The edge banding product class indicates the material is intended to finish raw panel cores, giving fabricators a matched Nevamar S6024T edge on door, drawer, and cabinet box components that use that same surface pattern. Because both the SAP description and web description repeat 15/16 x .018 Nevamar S6024T, shops can align this edging with drawings or cut lists that call out that exact Nevamar S6024T identifier, supporting consistent visual results across a project.
The .018 thickness detail in the 15/16 x .018 Nevamar S6024T, Frama-Tech FM15/16X018-S6024T description sets expectations for trimming behavior, allowing operators to dial in cutting depth and scraping pressure appropriate for a thin PVC edge layer. The 15/16 inch width dimension helps programming and manual setup on edgebanders, since feed paths and panel offsets can be planned around the known overhang this Nevamar S6024T edging provides before final trimming. The PVC classification defined by the Edgebanding & Surfacing|Edgebanding, PVC category lets shops align glue type and temperature windows to typical PVC edge banding practice, which supports consistent bond quality around panel perimeters. The explicit Nevamar S6024T and Frama-Tech FM15/16X018-S6024T references across the SAP description, web description, and manufacturer part number provide clear identifiers for material pull sheets, helping production teams repeatedly select the same edging when jobs rerun or when replacement parts are fabricated later.
The 15/16 x .018 Nevamar S6024T size states a 15/16 inch wide, .018 inch thick PVC edge banding, guiding panel layout, trimming allowance, and edge processing settings.
The Nevamar S6024T reference ties this edge banding to the Nevamar S6024T surface design, simplifying pattern matching across panels, doors, and drawer fronts.
The Frama-Tech FM15/16X018-S6024T code serves as a precise identifier for the same Nevamar S6024T edge banding, supporting accurate reordering and documentation.
The .018 thickness on this Nevamar S6024T edge banding creates a thin PVC layer, influencing trimming aggressiveness and helping achieve a low-profile finished edge.
The Edgebanding, PVC category identifies this Nevamar S6024T product as PVC edge banding, aligning it with standard PVC glue, heat, and feed practices.
The manufacturer part 15/16X018-S6024T links directly to this Nevamar S6024T edge banding, helping crews match drawings, inventories, and repeat jobs.
The 15/16 x .018 Nevamar S6024T, Frama-Tech FM15/16X018-S6024T PVC edge banding pairs a defined 15/16 inch width with a thin .018 profile and the Nevamar S6024T design reference, giving shops a clearly identified edging for that pattern. The Edgebanding & Surfacing|Edgebanding, PVC category and the 15/16X018-S6024T manufacturer part number supply consistent identifiers across purchasing and production, supporting straightforward repeat orders. For projects calling out Nevamar S6024T surfaces on cabinets or casework, this edge banding provides a matched, dimensioned edging option ready to slot into established panel-processing workflows.
Sold In: 1 Lineal Ft