Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top self-close hinge handles full overlay doors on both frameless and face-frame cabinets, mounting with EXPANDO expanding dowels for a firm, mechanical connection to the cabinet panel.
Full overlay places a single door over nearly the entire cabinet side, the layout that reads as a clean, unbroken face across a run of cabinets. This hinge is built for that geometry, with a straight arm that registers the door at the full overlay position when paired with the matching Blum base plate. The 35mm cup bores into the back of the door, the arm clips to the plate on the cabinet, and the plate is ordered separately. Because the hinge works on both frameless and face-frame construction, it moves between cabinet types without a hardware switch.
The hinge body is steel with a nickel finish. Nickel is a practical finish choice on a concealed hinge because it sits behind the door during daily use, but it matters on face-frame cabinets where the arm is visible when the door swings open. The three-way adjustment range handles the settling and racking that comes with any new install, so the reveal stays even without pulling the door off the plate.
Cabinet shops running full overlay work on frameless boxes will find this hinge straightforward to spec and order in volume. It is equally at home on face-frame work, where the self-close spring suits buyers who want doors that close on their own without the added cost of a damper. The EXPANDO mount is a good fit for production runs where a screw-free, mechanically anchored plate connection is preferred over INSERTA press-in or traditional screw-on. For projects where a cushioned, quiet close is the requirement, the BLUMOTION soft-close version of this arm is the next step up. For doors thicker than about 22mm, move to a thick-door hinge with the appropriate cup geometry.
Both are Blum plate-to-cabinet mounting methods. EXPANDO uses expanding dowels that anchor mechanically into the cabinet panel for a firm connection. INSERTA uses pre-mounted system screws that press into 5mm pre-drilled holes without tools. EXPANDO suits applications where a stronger mechanical hold is preferred.
No. The base plate is a separate purchase. Order a Blum plate matched to your cabinet construction and the door position you need. Plates are specific to the Blum CLIP top system and are not interchangeable with other brands.
No. This hinge has self-close: a spring pulls the door shut over the final degrees of travel, but there is no damper to slow or cushion the close. For a quiet, damped close, choose the BLUMOTION version of this hinge instead.
Yes. The hinge is rated for both cabinet types. The base plate you pair it with should be selected to match your specific cabinet construction.
Specify this hinge when the job calls for full overlay doors that close on their own, a finish that coordinates across the hardware run, and a plate mount that holds firm once it is set.
Sold In: 1 Each
