Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the LEGRABOX ThinFront front fixing bracket in Zinc, matched to M-height (90.5mm) side profiles. It attaches the drawer front to the LEGRABOX side at the correct position and height, providing front adjustment while keeping the visible hardware finish consistent inside the cabinet.
The front fixing bracket is the mechanical link between the LEGRABOX drawer side profile and the finished drawer front. It carries the front adjustment — letting the installer align the front for height, side position, and tilt after the drawer is in place — without removing the front from the cabinet. In a production run or a kitchen with multiple drawers, that adjustability means getting every gap lined up without repeatedly pulling boxes. The ThinFront version is proportioned for slim fronts rather than thick slab doors, so the reveal and adjustment geometry work out correctly for that front style.
The Zinc finish on this bracket is part of what makes the LEGRABOX interior look deliberate rather than assembled from unrelated parts. When a project spec calls for Zinc hardware throughout the drawer system — sides, runners, cover caps, and front fixings — sourcing this bracket in Zinc keeps every visible surface in the same family. The bracket itself is stainless steel, so the structural material is corrosion-resistant even where Zinc plating meets the humidity of a kitchen environment. For projects where the interior finish is Orion Gray, Silk White, or another LEGRABOX color option, select the bracket in that matching finish instead.
Cabinet shops building LEGRABOX M-height drawers in quantity will use this bracket on every front in the run. It suits residential kitchen and bath cabinetry, custom furniture drawers, and commercial casework where the LEGRABOX platform is specified. The non-handed design is practical in a shop setting: one SKU covers both sides of the drawer box, so the parts bin stays simple and mis-picks are less likely. Designers specifying LEGRABOX systems with Zinc hardware throughout should call out this bracket by height code and finish to make sure the finish match holds from the side profile to the front fixing.
This bracket is made for the M-height (90.5mm) side profile. LEGRABOX front fixing brackets are height-specific — the bracket geometry matches the side profile it is designed for. For C, F, or K height sides, select the front fixing bracket made for that height.
Because this bracket is non-handed, the same part works on both sides. You will need one bracket per side — two per drawer — so order in pairs when planning a full cabinet run.
No. Front fixing brackets are engineered per platform. This bracket is made for LEGRABOX and is not compatible with TANDEMBOX, MERIVOBOX, or other Blum drawer systems.
ThinFront refers to the LEGRABOX bracket program sized for slim drawer fronts rather than thick slab panels. If your project uses standard-thickness fronts, confirm with the LEGRABOX system documentation which bracket version your front style requires before ordering.
Specifying the correct front fixing bracket by height and finish at the start of a LEGRABOX project means the fronts align on the first install and the hardware reads as one cohesive system — not something to sort out after the boxes are in the cabinet.
Sold In: 1 Each
