Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus DCN1 pin tumbler cam lock is a cam lock from Olympus Lock, Inc. that secures cabinets and similar applications using a pin tumbler cylinder, so it supports keyed control rather than simple latch-only closure. The lock uses a zinc die cast body and zinc die cast pin tumbler cylinder, which provides a rigid housing and precise pin operation for consistent key action in daily use. The 1 inch face is designed to cover splintering around the hole, allowing a clean finished look on the door or drawer without relying on a separate trim ring. Keying can be matched with other N Series locks, so one key can operate multiple locking points when they share the same N Series system. Stock keying is KD/KA 4 pin standard with stock KA numbers 101, 103, 107, and 915, which supports either individual keying or keyed-alike groups across a project.
The Olympus DCN1-26D-KD cam lock is specified for 3/4 inch material thickness, so it is suited to common cabinet door and drawer stock where that dimension is standard. The satin chrome 26D finish provides a neutral metallic appearance that works with many commercial cabinet hardware finishes in visible locations. Two reversible cams are designed to work in all positions, which allows the lock to be configured for different door or drawer swing directions using the same core product. The 1 inch face simplifies hole coverage around the bore in the panel, which can reduce additional finishing steps at the installation point. The key removable in locked or unlocked position function means the installer can orient the cylinder without being constrained by key retention in one state only.
This Olympus DCN1 pin tumbler cam lock sits in the Locks and Latches Cam Locks product class, so it is aimed at cabinet and similar enclosure applications that require key-controlled access. The specified 3/4 inch material thickness aligns with many plywood and composite cabinet constructions, making it a fit for casework built around that standard thickness. The satin chrome 26D finish suits projects where a brushed, neutral metallic appearance complements other satin-finished hinges and pulls on doors or drawers. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, positions the lock for jobs where those systems are already in use across other openings. The product being acknowledged by the Woodwork Institute supports its use in woodworking-focused environments where recognized products are specified.
The zinc die cast body and zinc die cast pin tumbler cylinder provide a stable housing and precise internal components, which supports repeatable key insertion and turning over time. The N Series keyway that can be keyed together with other N Series locks allows a keyed-alike scheme on larger installations, so multiple cabinet doors can be operated by one key where that layout is desired. The easily rekeyable design via cylinder retainer clip means the cylinder can be reconfigured for new keys without removing or changing the surrounding cabinet construction, which is useful when access control requirements change. Masterkeying is supported with a 5 pin standard configuration and grand masterkeyed options are available, allowing tiered key systems where different user groups operate different sets of openings. The standard function with key removable in the locked or unlocked position supports both remove-key-when-open workflows and keep-key-with-user approaches, depending on how the cabinet is used day to day. The two reversible cams designed to work in all positions give flexibility to orient the cam for various door swings or latch points using the same lock core. Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, indicates the lock has been tested to a demanding cam lock standard for strength and operation. The face design that covers splintering around the bore allows installers to drill the required hole and rely on the 1 inch face to present a clean finished edge at the visible surface.
The Olympus DCN1-26D-KD cam lock is specified for 3/4 inch material thickness, which matches many cabinet doors and drawer fronts built from standard panel stock.
The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this cam lock operate within projects already using those key systems for coordinated keying.
The Olympus DCN1 pin tumbler cam lock is easily rekeyable via a cylinder retainer clip, so keying changes can be completed without changing the lock body installation.
The standard function lets the key be removed when the cam is either locked or unlocked, giving flexibility in how users carry or store keys during cabinet operation.
Passing ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, indicates the cam lock has been tested to a high performance standard for its category.
The 1 inch face covers splintering around the hole, providing a cleaner visual edge on the door or drawer without relying on a separate trim ring.
The Olympus DCN1-26D-KD satin chrome cam lock pairs a zinc die cast pin tumbler cylinder with an N Series keyway, so it fits cabinet projects needing keyed control tied to established N Series or equivalent National systems. With 3/4 inch material thickness suitability, a 1 inch face that covers splintering, and two reversible cams working in all positions, it aligns well with common cabinet construction and varied door swings. For installations needing keyed different units now, with the option for rekeying, masterkeyed 5 pin standard configurations, or grand masterkeyed layouts later, this Olympus cam lock offers a practical path to controlled access across casework.
Sold In: 1 Each
