Olympus DCN1 Pin Tumbler Cam Lock, 3/4" Material Thickness, Oil Rubbed Bronze, Keyed Different - DCN1-10B-KD

Olympus DCN1 Pin Tumbler Cam Lock For Casework

Olympus DCN1 pin tumbler cam lock gives you a compact lock solution for 3/4 inch material thickness, so it suits many cabinet and casework panels without extra build-out. The lock body and cylinder are zinc die cast, which creates a rigid locking component for typical woodworking and fixture applications. A 1 inch face covers splintering at the bore, helping finished panels look clean after drilling. The face also removes the need for a separate trim ring, reducing parts to track on the job. The standard function allows the key to be removable in the locked or unlocked position, so doors or drawers can stay open while keys are managed elsewhere. This DCN1-10B-KD model is finished in 10B oil rubbed bronze, providing a dark decorative look that matches projects using that finish family.

Cam Lock Details That Support Daily Use

• The DCN1 cam lock is keyed different as stock, which keeps each lock on a project operating on its own key pattern when separate access is required.
• Keying can be set to work together with other N Series locks, allowing one key pattern across multiple lock points when a common key is preferred.
• The lock is easily rekeyable via a cylinder retainer clip, so keying changes can be carried out while keeping the same installed body in the panel.
• Cylinder construction uses a pin tumbler system, providing a familiar keyway and operation for users accustomed to standard pin tumbler hardware.
• Two reversible cams operate in all positions, supporting various door or drawer swing directions and latch engagement points from the same core lock body.
• This cam lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, giving it a performance rating aligned with that cam lock standard.

Installation And Fit For 3/4 Inch Panels

This Olympus cam lock is designed for 3/4 inch material thickness, so layout and boring can be based on that panel dimension during casework construction. The 1 inch face helps mask minor chipping at the hole edge, which is useful when boring through veneered or laminated stock. The body and cylinder are zinc die cast, giving a consistent shape that suits repetitive boring jigs. Key removal in both locked and unlocked positions influences how the lock is used on doors or drawers that remain open during loading. Two reversible cams that work in all positions allow the installer to select the cam orientation that best engages the strike or frame, while using the same lock core.

Using This N Series Cam Lock In Woodwork

Cam Lock Applications In Cabinet And Fixture Work

This Olympus Lock, Inc. DCN1-10B-KD cam lock is part of the N Series keyway system, equivalent to the National D4291 4-pin or D4292 5-pin system, so it fits projects built around that keyway convention. The 3/4 inch material thickness suitability aligns with many cabinet doors, drawer fronts, and casework panels, making it practical for general woodworking installations. The 1 inch face helps maintain a finished look on decorative surfaces such as laminates or veneers by covering splintering at the bore. The oil rubbed bronze 10B finish supports installations where a darker, warmer hardware tone is desired across locks and other visible hardware. This pin tumbler cylinder design provides a recognizable key feel for users already working with N Series key systems. Stock keying as KD/KA with 4 pin standard and stock KA numbers 101, 103, 107, and 915 supports projects where both individually keyed and keyed-alike N Series installations are used.

Details That Support Consistent Locking Performance

The Olympus DCN1 pin tumbler cam lock passed ANSI/BHMA A156.11 Grade 1 performance requirements, giving it a defined benchmark within that cam lock performance category. The rekeyable design via cylinder retainer clip allows the cylinder to be changed to different N Series keying while leaving the body in place, which is useful when key levels on a site are reorganized. Masterkeyed operation is available on a 5 pin standard, and a grand masterkeyed option is available, supporting tiered key control where N Series systems are used. Two reversible cams that work in all positions provide flexibility to match different door or drawer constructions, helping maintain smooth cam action across varied layouts. The Woodwork Institute acknowledges this product, which aligns it with specifications that call out that reference for hardware selection in millwork projects.

Buyer Questions About Olympus DCN1 Cam Lock

Selecting This N Series Cam Lock For Projects

The Olympus DCN1-10B-KD pin tumbler cam lock combines a 3/4 inch material thickness design, N Series keyway, and oil rubbed bronze finish, aligning it with many cabinet and fixture applications. The rekeyable cylinder, ANSI/BHMA A156.11 Grade 1 performance, and reversible cams support long-term use on woodworking and casework projects that rely on N Series key control. For projects using 10B finish hardware and N Series keying, this cam lock provides a matching component for doors, drawers, and panels built around 3/4 inch stock.