Olympus DCN1 Pin Tumbler Cam Lock Function

Olympus DCN1 pin tumbler cam lock is a cam lock from Olympus Lock, Inc. that uses a zinc die cast body and cylinder to provide a compact locking point for 3/4 inch material thickness. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, keeps the lock compatible with existing N Series key plans in a shop or facility. Key removable in locked or unlocked position standard function lets installers remove the key after either position, which supports varied operating procedures on cabinets or enclosures. Two reversible cams that work in all positions allow the same lock body to drive different latch motions, which helps align the cam to the cabinet strike. The 1 inch face that covers splintering eliminates the need for an additional trim ring. The oil rubbed bronze 10B finish gives the face a darker appearance that can align with existing bronze hardware.

Key DCN1-10B-KDMK Details For Daily Use

• The zinc die cast body and pin tumbler zinc die cast cylinder create a rigid cam lock housing, which supports repeated key cycles in typical cabinet or fixture installations.
• Key removable in locked or unlocked position function allows users to secure doors in either state without changing hardware, which can simplify operation patterns across multiple cabinets.
• Two reversible cams that work in all positions provide flexibility for right-hand, left-hand, or vertical cam actions, which helps one lock part number serve different cabinet layouts.
• The 1 inch face that covers splintering reduces visible edge damage around the bore, which is useful when installing in woodwork where a clean finished appearance is important.
• Passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 / E07271, so the lock meets a recognized cam lock performance standard that specifiers often require.

Cam Lock Fit For 3/4 Inch Material

This Olympus DCN1-10B-KDMK cam lock is designed for 3/4 inch material thickness, which matches common cabinet doors and panels. The body style as a cam lock from the Locks and Latches - Cam Locks category positions the cam behind the panel to drive engaging hardware. The 1 inch face sits on the exterior surface to cover the bore, so the lock visually finishes the hole while the cam hardware operates inside the cabinet. The oil rubbed bronze finish coordinates with hardware specified as finish 10B, which helps maintain a consistent look across locks and pulls. As a rekeyable cam lock with a cylinder retainer clip, it can be rekeyed by changing the cylinder pins through that interface, supporting key system changes.

Using This Olympus Lock Cam Lock In Projects

Where The Olympus DCN1 Cam Lock Applies

The Olympus Lock, Inc. cam lock sits in the cam locks product class, making it suitable anywhere a rotating cam is needed behind a 3/4 inch panel. The Woodwork Institute acknowledged product status indicates it appears in woodwork-focused specifications, which aligns the lock with casework and millwork applications. Its ability to be keyed together with other N Series locks helps consolidate cabinet and furniture locks under a single key system within a project. Stock keying as KD/KA 4 pin standard with listed stock KA numbers 101, 103, 107, and 915 provides predefined keyed-alike groups that can be used across multiple doors or drawers. Masterkeyed 5 pin standard and grand masterkeyed availability support tiered keying arrangements, so facilities can organize access levels across many locks while keeping the same core product line. Because the cam hardware works in all positions, the same lock can serve horizontal drawers and vertical doors, reducing variation in specified parts.

Details That Support Repeatable Lock Installations

The N Series keyway, which is equivalent to the National D4291 4-pin or D4292 5-pin system, allows locksmiths and millwork shops familiar with National style keys to integrate this lock into existing cutting equipment and key schedules. Passed ANSI/BHMA A156.11 Grade 1 performance requirements, equivalent to E07261 and E07271, which ties the lock to a quantified performance level often referenced in architectural documents and helps installers match specified grade. Rekeyable construction using a cylinder retainer clip permits cylinder changes without replacing the entire cam lock body, which can reduce material replacement when a key system is updated. Two reversible cams that work in all positions create installation flexibility when orienting the cam to strikes or fixed angles, which can reduce layout constraints inside casework. The face in oil rubbed bronze finish 10B coordinates with finish schedules that call out that color, supporting visual consistency across hardware families on a project.

Common Questions About This N Series Cam Lock

Select Olympus DCN1-10B-KDMK For N Series Projects

The Olympus DCN1-10B-KDMK pin tumbler cam lock combines a zinc die cast cam body, N Series keyway, and 3/4 inch material fit to serve typical cabinet and casework installations. Its ANSI/BHMA A156.11 Grade 1 performance rating and Woodwork Institute acknowledgment position it well for specification-driven projects. The oil rubbed bronze 10B face, 1 inch coverage over the bore, and flexible two-cam operation support both aesthetic and functional goals. For projects using N Series key systems and 3/4 inch panels, this Olympus cam lock offers a focused solution.